![]() |
#106
|
|||
|
|||
Time to take out the old grinder again
![]() No way back now. ![]() ![]() ![]() Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#107
|
|||
|
|||
After a lot of drilling, the dash is out.
![]() ![]() ![]() Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#108
|
||||
|
||||
Hey,
How is it going? any news? ![]() Stevo
__________________
german-ghia.blogspot.com |
#109
|
|||
|
|||
Hi Steve,
I am very buisy wright now drilling all the spotweld of the donor car, no pictures yet. Als had a very cool weekend at EBI #4. Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#110
|
|||
|
|||
The EBI Chimay weekend was superb, but now it is oval time again.
Al the old repairs are cut out of the donor front and today I started cleaning the underside of it. This is a very good piece of German metal. ![]() ![]() ![]() Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#111
|
|||
|
|||
Finally did something visible again.
Complete parafan removed. ![]() Took a wile to find the currage, but it had to be done. ![]() Both doorpillars removed :shock: :shock: ![]() ![]() Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#112
|
|||
|
|||
a few holes.
Looked at an original , never welded body and then circled all the original holes. The rest has to be welded. ![]() How it should be. ![]() After storage for many years, this all original (only the exhaust cutouts are not original), rust free and never welded oval is my workshop neighbor. now i can check it if I need to know how things should be. (i am not aloud to touch it ;D) ![]() Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#113
|
|||
|
|||
Replaced the right windshield heater thing and repaired the left one.
![]() ![]() In the past someone drilled a lot of holes in this car, today I fixed it. This is a difficult to reach area, so while I was in there I might as well bare metal it. ![]() ![]() Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#114
|
||||
|
||||
nice
![]() |
#115
|
|||
|
|||
Getting close 8)
![]() ![]() Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#116
|
||||
|
||||
My hat is off to you. Lots of metal work going into this one.
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe |
#117
|
|||
|
|||
Really nice (and quick too)
![]()
__________________
1967 Bug |
#118
|
|||
|
|||
Thanks Guys,
I am not afraid of doing new things. this kind of work is new for me, but i'll get there. Paul
__________________
If some is good and more is better, then too much should be just about right! |
#119
|
|||
|
|||
Satrting to look good.
![]() Right side is getting there as well. ![]() Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#120
|
|||
|
|||
Between family live, work and some work on my daily passat, the oval is going forward as well (slowly).
Bolted the nose on the body, now i can see better what to do and where to do it. It looks like the right is OK. ![]() ![]() On the left I had some fitting problems, probably the welds from the pedalbox where to hot. I cut out the piece that did not fit and welded in a bigger piece instead. ![]() ![]() Still needs some welding, grinding and sanding. Paul.
__________________
If some is good and more is better, then too much should be just about right! |
![]() |
Currently Active Users Viewing This Thread: 3 (0 members and 3 guests) | |
|
|