GermanLook Forums  

Go Back   GermanLook Forums > Technical Section > Transmissions

Thread Tools Display Modes
Old April 20th 2016, 21:00
rioprelude rioprelude is offline
Join Date: Nov 2005
Posts: 105
(Repost) G50/01 Teardown Info

Ended up having my G50 serviced/shortened by CMS. Here is the info I used to initially tear it down:

Here are the references I used:
Wally's G50 Post on Pelican Parts

Post on Impact Bumpers

Removed the cover:

Air impact to remove the 40mm and 19mm?:

Removed gear and slider:

Used a Proto Puller after grinding off most of the arm material to fit under the gears:

See some worn/flat teeth on the thin black ring attached to the gear, but they don't appear to be broken?

Pulled the case off:

Main Gear assembly:

Removed the m8 nuts holding the assembly to the case:

Removed Diff:

Working on a long socket to remove the input shaft from the gear assembly:
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 22:35.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002-2017. All Rights Reserved