|
#1
|
|||
|
|||
Turbonutta is back
Hi everybody on the forum, I havnt been around for a while as i have been painting primer (5coats now) and sanding and filling and sanding and filling and sanding and filling and you get the idea.....WHY does PERFECTION take so long....Well it might not be perfect but i have had a good go.
If you look at the attachments i have included a picture of the mounting of my IHIRHB5 Turbo simular to a subaru legacy. The chargecooler is large and is a pre production unit a good friend sourced for me. I will attach a picture of the body work when i have wrestled them out of my diggi cam LOL hope you are mildly interested....NUTTA Suicide doors 2.1type4turbo 17porsche rims |
#2
|
|||
|
|||
Dude...I'm thinking about doing the turbo in the backseat section too. Do you have anymore pics (or links to pics) of the setup? How much hp do you think you'll have? How much boost? Thanks!
Matt F. |
#3
|
||||
|
||||
Good to see you back. Nice progress on the car. :agree:
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe |
#4
|
|||
|
|||
How much bhp do i have matt, thats what i would like to know myself, the engine is in the prossess of being finished of i have put the motor spec below.
i cant wiat to run it(i hope it works) i have a load of photos of the bulkhead area matt if you want to see more its great for gaining alot of space Type 4 case 71x96 Balanced and Blue Printed CSP Deep sump with turbo oil return BAS oil filler pipe Hand made stainless steel exhaust manifold ending in Bentley R Turbo tailpipe GAC Engineered Heads 45in x 37ex La performance pulley CB air boxes Scat manifolds Engle FK7/8 Turbo grind on straight cut gears Shadeck oil pump Kobelshmitt bearings Total seal rings Bosch fuel filter Fuel pump CSP carbon fan shroud Latest model 911 air cooled 12 blade fan Samco black turbo hoses 8 inch Carbon air box/filter IHI RHB5 Turbo charger from Subaru legacy turbo CSP Throttle linkage Bosch heated lambda probe Omex coil pack, air temp, oil temp, map sensor TWM throttle position sensor TWM 45mm quad injector Throttle bodies TWM fuel rails 4x Cosworth green injectors DTA ECU Bailey Re-circulating dump valve One off Custom Charge cooler Custom wiring harness Bosch 12volt water pump Polo 1.4 Radiator Renault 5 turbo fan Custom Blue silicone water hoses i may have left a few bits out but hey i cant type anymore........ NUTTA |
#5
|
||||
|
||||
Nice stuff, I'm very curious how it will run....
What kind of clutchcombo are you going to use? Grtz Robin |
#6
|
|||
|
|||
Hi Blu ,clutch is Porsche 911 and the flywheel is from kennedy the gearbox is a 911sc 915unit thanks
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|