#1
|
||||
|
||||
No reverse lockout ?
I took out my quick shift kit because, well, it sucked.
However it appears that my reverse lockout no longer works ? I can shift in reverse without pushing down the shifter. I checked to make sure I had the shifplate right side up and all that, and I moved the plate around to see if that made any difference, but no dice ? What does this mean ? Busted transmission ? Bent shiftrod ? BTW, stock trans in a '70 Standard.. Rob. |
#2
|
||||
|
||||
Hi
You may have the shift plate in the wrong way round. I will try to find a photos of the correct fitting. Steve
__________________
STI powered 1303 in the works. |
#3
|
||||
|
||||
The bent part on the inside of that plate, should be facing down, and to the right.
__________________
'72 super '65 bus '52 split |
#4
|
||||
|
||||
Hi
I found a picture I downloaded form somewhere on the net. Steve
__________________
STI powered 1303 in the works. |
#5
|
||||
|
||||
Thanks guys, I'll check again later today, but I'm pretty sure that's how I mounted it
Rob |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|