GermanLook Forums  

Go Back   GermanLook Forums > Technical Section > Transmissions

Reply
 
Thread Tools Display Modes
  #16  
Old October 3rd 2009, 07:36
buggyboyshane buggyboyshane is offline
Registered User
 
Join Date: Jan 2006
Location: n. ireland
Posts: 42
Quote:
Originally Posted by chug_A_bug View Post
hey... if you are using a T1 then you Need a 200mm flywheel and a autostick/bus Starter and you are going to have to take out the Stud that holds the starter and shave
about 5mm off, then everything Should work. hope that helps

Chris.
brilliant!!!

gotit started!!! wooooooooohooooooooo!!!

using a 914/ t25 auto starter......... works a treat!!

ok........... next problem........

i have stock beetle clutch cable with special ends for porsche throw out arm.

when i press clutch, the arm is pulling underneath ok to throw out the bearing but only moves slightly before hitting gearbox case underneath.

it seems to me like i should maybe have a spacer behind the throw out arm, means the release bearing would be closer to the clutch and the arm could travel more underneath........ or else slightly bend the arm, but worried about that one!!

any ideas??
Reply With Quote
  #17  
Old October 3rd 2009, 13:29
vdubzack's Avatar
vdubzack vdubzack is offline
Registered User
 
Join Date: Aug 2009
Location: Near, Washington, D.C.
Posts: 177
Quote:
Originally Posted by buggyboyshane View Post
brilliant!!!

gotit started!!! wooooooooohooooooooo!!!

using a 914/ t25 auto starter......... works a treat!!

ok........... next problem........

i have stock beetle clutch cable with special ends for porsche throw out arm.

when i press clutch, the arm is pulling underneath ok to throw out the bearing but only moves slightly before hitting gearbox case underneath.

it seems to me like i should maybe have a spacer behind the throw out arm, means the release bearing would be closer to the clutch and the arm could travel more underneath........ or else slightly bend the arm, but worried about that one!!

any ideas??
Check this thread, and get in touch with them. Thats what I did
http://www.germanlook.net/forums/showthread.php?t=9153
Reply With Quote
  #18  
Old October 14th 2009, 16:24
jmd's Avatar
jmd jmd is offline
Registered User
 
Join Date: Jan 2006
Posts: 155
I hear that the solution to this is to bend the arm. But I am using the 901, with a (Currently) stock cable and it works fine. But I am about to convert all that to a custom pendulum pedal setup so my configuration will change.
Reply With Quote
  #19  
Old October 14th 2009, 17:06
buggyboyshane buggyboyshane is offline
Registered User
 
Join Date: Jan 2006
Location: n. ireland
Posts: 42
Quote:
Originally Posted by jmd View Post
I hear that the solution to this is to bend the arm. But I am using the 901, with a (Currently) stock cable and it works fine. But I am about to convert all that to a custom pendulum pedal setup so my configuration will change.
i was using 901 one and needed to bend the arm and grind some of the hook away to let it slide past the frame horn, all worked perfect!!
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:54.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved