Porsche 915 gearbox for sale!

[dub_crazee]

Porsche 915 Gearbox out of an early 911

It was mounted into my germanlook beetle project then removed, sodabasted, etch primed and painted silver.
The only things i have done to the gearbox is drill 4 holes in the bell housing to mount it to a beetle - and shortened the shift rod.

Unfortunately i cannot read the code on the bottom rib as it has been scratched where its been sat on the floor.

Looking for £1,000ono



i also have a 915 shifter, shift rod, coupling and front mount which i can sell seperately.

Cheers

Deano

[Jim Hunter]

This gearbox looks to be from an SC (3.0) early models up to 1978 as from the side cover...Electronic speedo and 8:31 R&P.

[dub_crazee]

Hi Jim, pretty sure its a 72/73 model box

[Jim Hunter]

Sure it can be either and after closer inspection there is early drives flanges with 4 bolts 2 pins combo...Is there two bolts that secures the T/Ο bearing guide to the case or none ?
If so then an 7:31 R&P,mech speedo and magnesium case...

[dub_crazee]

it's the latter jim, mech speedo - magnesium case with TOB sleve part of the casting of the case. the slightly later ones had a pressed in sleeve then the later ones than that had the two screws securing the tob sleeve. it feels hell of a lot lighter than my '79 aluminium cased box!

[-Alex-]

It's then either 915/02, 06 or 43? I am looking mag cased 915 with 7:31 R&P