#1
|
|||
|
|||
Need a HELP!
Hi!
I need from you some good advice! I plane to put at my 1303 S bug rear disc! One of my problem is that I live in Croatia so original parts for my is something like nice dream.... So I haw to be man of my one ..... I bought from junckyard VW golf caliper... my problem is that cylinder size is 38 mm. I read on this forum about front rear break balance... So I need someone to confim my thinking... In front I have standard calipers and disc on rear golf caliper and golf I front disc. If I count brak size front -rear I get (4,16:3,76) or 1,11:1 this is very bad I know but then the disc size is diferent fron diameter is 278mm and rear is 238mm. So the moment at front is biger then back so at the and I get balance 1,3:1 is this good inaf? What else I can do to inpruf balans of breaking? Thanks a lot! Regards from Croatia! Tomica p.s. sorry for my english… Last edited by AcyTom; June 24th 2003 at 02:40. |
#2
|
||||
|
||||
Hello!
From what golf is your calipers sourced from mk ? If is from mk i is not recommended to use them. If is from mk ii/ii go ahead and put them. No brake balance adjuster is required at all. Most aftermarket rear brake kits use oem golf mk ii/iii calipers. Have you ever see any of the kits to come with a balance adjuster? No! So, go ahead and keep us informed! Best rgds,
__________________
Jim Andritsakos 74 1303 GL (project) 75 181 ex bundeswehr / 85 T3 Panel 86 T3 Syncro ambulance / 87 T3 Syncro doubledoor 16 89 T3 Syncro panel |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|