#1
|
|||
|
|||
Brakes advise
I'm converting my 1303 to electric using a Tesla Small driveunit and therefore have to upgrade my brakes. Have got Porsche 944na spindles in front and rear arms from the same 944na. Can I use the rear 4-pot calipers from a 2003 Boxster at the front of my 1303 or is there better options? I also got the rear 944 brakes
|
#2
|
||||
|
||||
You have to look at the piston sizes, and do some calculations to figure out if you can use the 2003 Boxster rears upfront.
For my German Look, I'm running Boxster calipers on all four corners, fronts on the front. Rear calipers on the rear. The fronts use 944 hubs modified to my beetle spindles, and 1976 911 rotors. This mates up perfectly with the front calipers (with custom caliper mounts). On the rear I'm using 944 bearing retainers (which have the caliper mount built in), 944 turbo rotors, and the Boxster calipers. No mounts or adapters needed. The piston sizes come into play with the Rally Bug. Currently it runs the 2-piston Ghia calipers (solid rotors) on all four corners. I have a set of 951 rear calipers coming off an Audi that I thought would make a great front brake update for the Rally Bug. BUT the combined piston area of the four piston Porsche rear caliper is smaller than the combined piston area of a 2-piston Ghia caliper. Thus, the car would end up rear biased. Can't use em. So, for your rear boxster calipers on the front question, you need to do some piston math and compare them with your rear calipers. I use https://brakepower.com/piston-area-calculator.htm -Dave
__________________
'71 Type 1 - Rally Project '58 Type 1 - I bought an early!?! '73 Type 1 - Proper Germanlook project '68 Type 1 - Interm German 'look' project '75 Type 1 - Family Heirloom '93 Chevy 3500 pickup - Cummins Swap |
#3
|
|||
|
|||
Thank you owdlvr for your reply! Yes I might source front calipers also.
|
#4
|
|||
|
|||
Still find it difficult to get the right parts, can someone please help me out what the options are? Boxster S calipers seems easier to get hold of. But which discs should I use if I go Boxster or Boxster S calipers? Using 944 spindles and 944 rear arms
|
#5
|
||||
|
||||
Boxster vs Boxster S rotors:
Non'S': F Disc 298mm, Pistons in Calipers 2x40,2x36 mm , pad area 216 cm^2 R Disc 292mm, Pistons in Calipers 2x30,2x28 mm , pad area 196 cm^2 Thickness (new): 24mm front and 20mm rear "S": F Disc 319mm, Pistons in Calipers 2x40,2x36 mm, pad area 254 cm^2 R Disc 299mm, Pistons in Calipers 2x30,2x28 mm, pad area 196 cm^2 Thickness (new): 28mm front and 24mm rear S rotors are thicker AND larger diameter. S pads are larger S calipers bolt in place of non S ones Boxster S brakes are identical to Porsche 996 brakes. But I don't know a front rotor that's going to work off hand for the S. For the regular boxster, it's easy. For the S I'd have to start going through them part for part. -Dave
__________________
'71 Type 1 - Rally Project '58 Type 1 - I bought an early!?! '73 Type 1 - Proper Germanlook project '68 Type 1 - Interm German 'look' project '75 Type 1 - Family Heirloom '93 Chevy 3500 pickup - Cummins Swap |
#6
|
|||
|
|||
Which mastercylinder do you use with the Boxster calipers?
|
#7
|
||||
|
||||
Presuming factory pedal setup. Empi Big-Bore master cylinder for disc brakes.
Yes. Seriously. Pedal feel is spot on.
__________________
'71 Type 1 - Rally Project '58 Type 1 - I bought an early!?! '73 Type 1 - Proper Germanlook project '68 Type 1 - Interm German 'look' project '75 Type 1 - Family Heirloom '93 Chevy 3500 pickup - Cummins Swap |
#8
|
||||
|
||||
Quote:
https://www.instagram.com/p/CwOqcvYIUxY/
__________________
---------------------------------------------------------- Greetings Gerold STi powered Typ4 in the works... R.I.P. 1302/'72 |
#9
|
|||
|
|||
Quote:
|
#10
|
|||
|
|||
I'm running BoxsterS on my 1302, stock master cylinder. I've done tons of Boxster setups on beetles too, using stock master (19mm) or the 20.6mm mentioned above. The 19mm engages about halfway down, but requires less pedal effort than the 20.6mm. You can also use a mk2 golf mc with adapter.
Boxster non S is preferred IMO, less unsprung weight. And for a bug you don't need the increased thermal mass/capacity of the S setup. Here is the rotor and caliper info, all non-S model. The non-S calipers come in black from factory. Calipers front: Boxster 2.5/2.7 97-08 Cayman 2.7 07-08 986 351 421 03 left 986 351 422 03 right Calipers rear Boxster 2.5/2.7 97-16 Cayman 2.7 07-14 986 352 423 01 left 986 352 424 01 right Rotor front (298*24mm) Boxster 2.7 05-08 Cayman 2.7 07-08 987 351 401 01 left 987 351 402 01 right Rotor rear (299*20mm) Boxster 2.7 05-16 Cayman 2.7 07-16 987 352 401 01 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|