GermanLook Forums  

Go Back   GermanLook Forums > General > Project Builds

Reply
 
Thread Tools Display Modes
  #1  
Old June 26th 2010, 12:37
JIMP JIMP is offline
Registered User
 
Join Date: Jan 2003
Location: Thessaloniki, Greece
Posts: 105
1303 75' 2387 efi

Hello all

as my engine is at last ready, and as my 1303 will be a germanlook, I thought I should share here some info, some pictures and videos for now from the engine, just received it from JPmotrosport









and some videos

http://www.youtube.com/watch?v=nOR7H...layer_embedded

http://www.youtube.com/watch?v=UtzR1...layer_embedded

The car still needs a lot of work but I think that the engine is already a good motivation to start with, cheers for now

Friendly

Dimitrios
Reply With Quote
  #2  
Old June 26th 2010, 16:12
volkdent's Avatar
volkdent volkdent is offline
Moderator
 
Join Date: Oct 2002
Location: Santa Rosa, CA, USA
Posts: 1,685
Beautiful motor!

Jason
__________________
If I could just get paid for my sleepless nights....
1960 VW Bug UBRDUB
Walkaround
1st Drag Run

Dyno Run
Oval Ragster-'57 Rag/'04 Boxster S
Reply With Quote
  #3  
Old June 26th 2010, 18:31
NO_H2O's Avatar
NO_H2O NO_H2O is offline
Administrator
 
Join Date: Aug 2002
Location: Stockbridge, GA.
Posts: 2,810
Very nice engine. Are those Nickies? Looks like you are set up for drag racing.
__________________
NO_H2O
72 1302 Smack Black GL
73 Bus (2L CIS Powered)
66 Beetle, 73 Standard Beetle
72 Pinzgauer 710M
Volksport Kafer Gruppe
Reply With Quote
  #4  
Old June 27th 2010, 03:33
JIMP JIMP is offline
Registered User
 
Join Date: Jan 2003
Location: Thessaloniki, Greece
Posts: 105
Hello

thanks Jason, NO_H2O yes they are nickies from LN engineering, well the car will see some black races but not drag strips, I have other for the strip, so this one will be primarily a street car. Some spec as it's not seen, don't have older photos, sorry

scat 86mm flanged crank, forged version not billet version
carrillo 5,7" rods
Je pistons
nickies and arp's
JPmotorsport MS230heads, inlet manifolds, roller throttle bodies and 5stud ratio rockers, the power comes from the heads out of the box, no porting no secrets, juts cutting the valve seats and that's all
48X38 cbperformance titanium valves
schubeck ceramic lifters
JPmotorsport aluminum tappered pushrods
engle cam -was unlucky to this one as two months after my engine was assembled Johannes released his raptor series camshafts, probably I would have some more power with one of these

Friendly

Dimitrios
Reply With Quote
  #5  
Old June 27th 2010, 06:36
judgie's Avatar
judgie judgie is offline
Registered User
 
Join Date: Mar 2003
Location: northants uk
Posts: 355
orsum looking motor and some amazing numbers on the dyno, cant wait to see the car.
__________________
my race car build galleryhttp://www.flickr.com/photos/1406263...7602662665607/
my web site www.rnjmotorsport.co.uk
Reply With Quote
  #6  
Old June 27th 2010, 11:10
volky00 volky00 is offline
Registered User
 
Join Date: Jun 2010
Posts: 21
nice looking set up.....
Reply With Quote
  #7  
Old June 27th 2010, 14:53
Wally's Avatar
Wally Wally is offline
Registered User
 
Join Date: Nov 2002
Location: The Netherlands
Posts: 2,552
Yeah, that is very hard-core Dimitrios! You must be one of very few that run the F1 oval roller throttle bodies.

Can you show us the car as well pretty please???
Reply With Quote
  #8  
Old June 27th 2010, 16:39
JIMP JIMP is offline
Registered User
 
Join Date: Jan 2003
Location: Thessaloniki, Greece
Posts: 105
Hello

thanks for the kind words, Wally I'll search for some decent looking ones or I will make some newer, as you understand I couldn't afford all together, now that the engine is done I can arrange to start working on the car -well in about a month from now as we're entering vacation period- anyway I'll post pics in the first instance

Friendly

Dimitrios
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 17:41.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved