|
|
#1
March 25th 2007, 04:52
|
|||
|
|||
|
are 928 gts and 965 turbo calipers the same thing?
are the 928 gts discs and the 965 discs the same
-are they 330 by 32 - -do they have a 80mm overall height -are they a 2 pice bell and disc/rotor - or combined -i have seen a gts with 17 inch cup 2's -i have 7 and 9 55et wheels -if i can indeed fit the 17 inch wheeled cayenne discs -330 by 32 but 68mm overall height -will the calipers hit the wheels? -any one have the small 30mm piston and the clips off the above calipers? -oh and a dust seal set -oh and 4 long bolts  -just that the cayenned 3.2 discs are 50 quid -the gts/965 -if they are the same , are 125 quid each 
|
|
#2
March 25th 2007, 04:57
|
|||
|
|||
 -right, are these a 2 piece set up -i know i need 80 ish mm, total hat -330mm by 32mm -is there a disc available www.eurocarparts.com -list the 17 inch wheel discs at 46 pounds plus vat -are they solid, or drilled - is the hat size 68mm -or more to the point, where can i get a radially drilled 330 by 28mm discs, combined with a 80ishmm hat -oh and a 30mm piston, seal set - and the big black clips 
|
|
#3
March 25th 2007, 10:05
|
|||
|
|||
|
http://www.cannell.co.uk/images/944%20Technical.htm
-so no -911 mount to the front 928 gts to the rear -ie you could swap them but the clip hinge is wrong -now stock it says the discs are 322 by 32 911 £107 -drilled 928 gts -£130 v6 cayenne 330 by 32 -hat 68.5 -£46 -so stock 964, would clear a 16 incher -with the hat at 80mm -i go out a farther 16mm, and come out 12mm -will i hit a cup 2 et55 -7 by 17 -or do i just stump up for the gts
|
|
#4
March 25th 2007, 10:06
|
|||
|
|||
|
Quote:
its so confusing, 928 gts =is s4 -1993-95 -322/32
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
