#1
|
||||
|
||||
Down and out in 2008
Hi Guys,
Looks like I will not be able to make any 2008 dates for shows / meets with the beetle I've been meaning to replace the floor pans and heater channels as the rust has been getting worse every year. My motor build is behind schedule so I've made the decision to pull the insurance for a year and get this fixed properly. I've got the tools and will be doing the work myself, I've ordered the Bug-Me DVD's to help so hopefully I can get it right the first time. I'll try to make some shows with the Honda and show some support ... its looking like 2008 is THE YEAR to be rolling (Thanks to Lanner) as there are many VW related activities planned. Maybe we can have a meet at my place ... a "raise the body off the pan" meet ... I've got a BBQ and a patio in the back .... Would be cool to have the front yard covered in VW's ... Later Sandeep |
#2
|
||||
|
||||
Sandeep,
Sounds like a plan! Floors and channels aren't too bad if you take your time. I've done em both! if you need a hand just holler! and if you need any tools just let me know, I got 'em all! Let's get Sandeep rollin! Alex
__________________
1970 Bug 2110cc. ???Whp, ???Ft/Lbs |
#3
|
||||
|
||||
hey Sandeep that's To bad but like Alex Said it's that that hard of a Job to do the Floors and channels I have a 110 welder if ya Need and other Fab and Body Tools too. I'm Down for A BBQ and pullen a body off the pan lol
I know you Said you were Behide but have you gotten a Chance to take Some pics and Measurements for that 901 I'm ready to pull the motor and tran this Weekend coming, Soo Common guys Lets help him out Chris. |
#4
|
|||
|
|||
Too bad bro, we'll miss the yellow monster.
Fire up the grill, burn some meat and I'm there. But that theory can turn on you.... I had a BBQ/pond digging party a few years back. I have nasty clay in the backyard, and digging is a killer. Well, all the boys and girls showed up, had a good meal, a few drinks...a good time all around. BUT, the festivities monopolized the schedule, and one (yes one) guy actually grabbed a shovel..... Still was fun though BTW: Anyone need any pond goldfish? These guys are worst than bunnies... Lanner |
#5
|
||||
|
||||
Booo that sucks, i'll miss it. Was watching the compilation clip on youtube yesterday.
I'll help pull the body. My suggestion, keep the beers locked. I have a fridge in the garage. When people come by to help, they help themselves to the fridge, and we talk BS while nothing gets done. I will be installing a padlock on the fridge very soon. Lanner, I'll take some Goldfish. The pond isn't opened yet. Pete
__________________
'72 super '65 bus '52 split Last edited by petevw; April 1st 2008 at 19:41. |
#6
|
||||
|
||||
Quote:
Alex P.S. was that the vid i tossed together?
__________________
1970 Bug 2110cc. ???Whp, ???Ft/Lbs |
#7
|
||||
|
||||
I don't know, did you put it together for Sandeep? Here's the clip:
http://www.youtube.com/watch?v=z_vJTRr6GT4
__________________
'72 super '65 bus '52 split |
#8
|
||||
|
||||
Quote:
Alex
__________________
1970 Bug 2110cc. ???Whp, ???Ft/Lbs |
#9
|
||||
|
||||
Sorry to hear you've got to deal with the Red Monster. I'll get that CD out to you ASAP, now I know why you are getting deeper!!!
Jason
__________________
If I could just get paid for my sleepless nights.... 1960 VW Bug UBRDUB Walkaround 1st Drag Run Dyno Run Oval Ragster-'57 Rag/'04 Boxster S |
#10
|
||||
|
||||
Hold on a sec....
Since you'll be spending some serious $$$ doing this, ohhh boy do i have a deal for you! I'll call you tomorrow, or ask Lanner/Greg. They know all about it. Right here in Toronto, wicked driver/sweet deal for the summer. Can plate ASAP, so you can roll aircooled.
__________________
'72 super '65 bus '52 split |
#11
|
||||
|
||||
Thanks for the support and comments.
I'm guessing I can replace the pan halves with the body still on from what I have read on the internet ... that alone should save me quite a bit of time. Perhaps I can replace the pans, drive it this summer, and then replace the channels in the fall after the season is over. Chris, I've taken the pictures and am now taking the measurements, hope to have this information to you this weekend. Pete, Give me a call if you can. Thanks All, Sandeep |
#12
|
||||
|
||||
Pan Off
I'll help pull the body, just get the Jerk Chicken Rolling Biggg Yella.....
Just give me a weeks notice( Got Kids ) ......LOL Cheers
__________________
Big Daddy/ VW EGO Lets Gooooo |
#13
|
||||
|
||||
Too bad you won't be out this year, but cool beans on the pan-fixin-body-pullin-beer-drinkin-bbq
Count me in..... I think at some point I'll be in the same spot Rob. |
#14
|
||||
|
||||
Pete,
I'll have to pass on the '65. My beetle has sentimental value and I've been wanting to tackle the rust issue for a couple of years now. If I can find some pans at the "Wet and Chilly", I'll put some plans together for a "Raise the Body" BBQ Sandeep |
#15
|
||||
|
||||
John usually has pans in stock, the ones I got from him were real nice too.
Like I said earlier, I'll be there for the barn, errr body raising. But if you need a hand doing the actual work, want to pick my brain, or just borrow my tools! Let me know, I'd be more then happy to assist in anyway. It can seem daunting that first time. Cheers bro, Alex
__________________
1970 Bug 2110cc. ???Whp, ???Ft/Lbs |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|