#106
|
|||
|
|||
Time to take out the old grinder again . I really need the parts for my oval, but still it was difficult to cut up this nice '58.
No way back now. Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#107
|
|||
|
|||
After a lot of drilling, the dash is out.
Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#108
|
||||
|
||||
Hey,
How is it going? any news? Stevo
__________________
german-ghia.blogspot.com |
#109
|
|||
|
|||
Hi Steve,
I am very buisy wright now drilling all the spotweld of the donor car, no pictures yet. Als had a very cool weekend at EBI #4. Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#110
|
|||
|
|||
The EBI Chimay weekend was superb, but now it is oval time again.
Al the old repairs are cut out of the donor front and today I started cleaning the underside of it. This is a very good piece of German metal. Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#111
|
|||
|
|||
Finally did something visible again.
Complete parafan removed. Took a wile to find the currage, but it had to be done. Both doorpillars removed :shock: :shock: Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#112
|
|||
|
|||
a few holes.
Looked at an original , never welded body and then circled all the original holes. The rest has to be welded. How it should be. After storage for many years, this all original (only the exhaust cutouts are not original), rust free and never welded oval is my workshop neighbor. now i can check it if I need to know how things should be. (i am not aloud to touch it ;D) Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#113
|
|||
|
|||
Replaced the right windshield heater thing and repaired the left one.
In the past someone drilled a lot of holes in this car, today I fixed it. This is a difficult to reach area, so while I was in there I might as well bare metal it. Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#114
|
||||
|
||||
nice
|
#115
|
|||
|
|||
Getting close 8)
Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#116
|
||||
|
||||
My hat is off to you. Lots of metal work going into this one.
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe |
#117
|
|||
|
|||
Really nice (and quick too)
__________________
1967 Bug |
#118
|
|||
|
|||
Thanks Guys,
I am not afraid of doing new things. this kind of work is new for me, but i'll get there. Paul
__________________
If some is good and more is better, then too much should be just about right! |
#119
|
|||
|
|||
Satrting to look good.
Right side is getting there as well. Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#120
|
|||
|
|||
Between family live, work and some work on my daily passat, the oval is going forward as well (slowly).
Bolted the nose on the body, now i can see better what to do and where to do it. It looks like the right is OK. On the left I had some fitting problems, probably the welds from the pedalbox where to hot. I cut out the piece that did not fit and welded in a bigger piece instead. Still needs some welding, grinding and sanding. Paul.
__________________
If some is good and more is better, then too much should be just about right! |
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
|
|