|
|
#31
November 11th 2010, 02:53
|
||||
|
||||
|
Hi
Your doing excellent work, I'm taking the body off a 1303 soon so it can be painted, I'm glad that we don't have the same problems down here as you do there. I might be seeing things but in the photo http://www.keversite.nl/fotoalbum/fotos/99903.jpg it looks like there is some sort bulge on the chassis floor at the rear end behind the seat rails, is this for something special or is it a piece of your bug puzzle waiting to be fitted? Steve
__________________
STI powered 1303 in the works. 
|
|
#32
November 11th 2010, 05:04
|
|||
|
|||
|
Quote:
The bulge is made to fit the oilcooler, I think this will have plenty of airflow. Good luck with your car.  Paul.
__________________
If some is good and more is better, then too much should be just about right!
|
|
#33
November 11th 2010, 06:04
|
|||
|
|||
|
Nice work Paul! I don´t think I have ever seen anyone make such a big modification for an oil cooler! I like it!
|
|
#35
November 11th 2010, 07:05
|
|||
|
|||
|
Quote:
__________________
If some is good and more is better, then too much should be just about right!
|
|
#39
January 12th 2011, 16:20
|
|||
|
|||
|
Found some time to work on the car again 8)
The underside of the left doorpillar was bad, of course >  time for a Hoekie of Hooky    First I had to shorten it, this way the bracing could stay in it's place.  fitting  It only needs some welding. 8)  Paul.
__________________
If some is good and more is better, then too much should be just about right!
|
|
#40
January 15th 2011, 15:37
|
|||
|
|||
|
This morning it was time to finish the doorpillar.
Welded the hooky piece.  Normally you can not reach the inside, mine is still open and it is double sheetmetal so I also welded the inside.  Then I dismantled the door (this is very heavy with all the parts and glass in it) and checked the gap, I must say ; I am very pleased with it.  Paul.
__________________
If some is good and more is better, then too much should be just about right!
|
|
#42
February 1st 2011, 12:28
|
|||
|
|||
|
Quote:
Paul.
__________________
If some is good and more is better, then too much should be just about right!
|
|
#43
February 17th 2011, 15:33
|
|||
|
|||
|
Not much time lately, but still a Little progress.
This piece of the trunk was a little thin, also the holes didn't mach the new kick panel. so I replaced the top of the kick panel by a wider piece, this way I can close (weld) all the holes.   And all the holes are closed again. before paint I will put some lead filler on it and it will be as new again, offcourse I will do the corners first.  Paul.
__________________
If some is good and more is better, then too much should be just about right!
|
|
#45
February 18th 2011, 15:16
|
|||
|
|||
|
Quote:
http://www.hookyspanelshop.com Paul.
__________________
If some is good and more is better, then too much should be just about right!
|
 |
| Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
