|
|
#1
January 31st 2008, 20:35
|
||||
|
||||
|
Porsche 944 tech page....
on the tech page it described using a kerscher disc, and 944t caliper......but
kerscher disc it 20mm thick 944T front disc is 28mm thick 944T rear disc is 24mm thick Or am i missing something?> 
|
|
#2
February 6th 2008, 17:54
|
||||
|
||||
|
38 views and no replies
|
|
#3
February 13th 2008, 22:08
|
||||
|
||||
944N/A single pot calipers are needed
You will need to use the 944N/A calipers on the kersher discs, or Boxter 986 brembo rear calipers from 97~. As the rear boxter discs(2.5L)(97~04?? ) are also 20mm. Same with 944N/A. So you`ll have to radially mount the boxter caliper to the front spindle . Boxter discs 24mm up front and 20mm in the rear, so you`ll have to use rear calipers up front for the kersher setup. Same as 944 N/As.
If I`m mistaken , someone please let me know. Last edited by vdubfund; February 13th 2008 at 22:13.
|
|
#4
February 18th 2008, 05:59
|
||||
|
||||
|
yep i agree with the above, and have considered the boxster conversion (although CSP do a kit i was going to source the calipers seperatly) so the info on tech page is wrong?
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
