|
#1
|
|||
|
|||
Cylinders
Hi everyone, I am trying to get my machinst to make me a set of Aluminum Cylinders. I am trying to find a very good Aluminum to have the cylinder made from. 2618, 4032, I believe have to much Silicone in the formula. I am told that Nikisil will not adhere to a high silicone base Aluminum.
|
#2
|
|||
|
|||
I once had the same idea and tried to find the suitable alloy. I can have them plated locally. Then i bought some Mahles cheap from ebay. I remember this thread at stf:
http://www.shoptalkforums.com/viewto...04085&start=15 regards iv |
#3
|
|||
|
|||
6061 t-6
Well, it seems as though my choices of aluminum's are greatly restricted by large quantities of purchase. 4032 would have been the perfect aluminum, but upon research I can only find 4032 in diameters of up to 2 1/2 inches. And the aluminum's such as 2018, 2016 of which they use to make Pistons are not playable with Nick assail. Even the true to its 6061 is going to be costly. But at the end of the day, I am forced to choose 6061 T6 extruded. Wish me luck
|
#4
|
||||
|
||||
Says who?
|
#5
|
|||
|
|||
20"s
Hi Walter, I may be wrong, it 2018 and I believe 2031.
|
#6
|
||||
|
||||
AFAIK, they can even nikasil iron liners...
|
#7
|
||||
|
||||
JE states that 4032 has indeed high silicon content, but 2618 hardly has any silicium as JE says. Thats the alu you started the thread with. Why not use that?
|
#8
|
||||
|
||||
Here's a good article on the subject:
http://www.enginebuildermag.com/Arti..._coatings.aspx The article states that the coating will not work on any 2000 series aluminum alloy. |
#9
|
|||
|
|||
US chrome and millennium technologies
Quote:
|
#10
|
||||
|
||||
After all machining and plating is done, I am pretty sure you will have spend about that amount...
|
#11
|
|||
|
|||
Exactly.Not only that,but you still have a product that you don not know how well it will perform.I would actually rather try the AA nikasil cylinders before spending a lot of money on having cylinders made.Yes,the LN cylinders are expensive,but they are a proven product.Another option worth looking into would be alusil cylinders from Mahle that are made for the 3.6 Porsche from the 993 model (the last aircooled model) and modify them to fit a type 4 case.However,after machining the price is probably the same or even higher than the LN cylinders.The only cheaper way around the LN cylinders are the AA cylinders.Iīm not saying they are better or even equal to the LN cylinders.However the Chinese have been the worldīs leader in aluminum nikasil products for over 20 years.Most OEM car and motorcycle engine blocks and heads that are alu-nikasil come from China including VW.Itīs not all bad from China.Itīs just finding the right company just like anywhere else.There are crappy companies in Germany and USA also.
|
#12
|
||||
|
||||
Quote:
|
#13
|
||||
|
||||
...or more.
Rarely is one-off stuff cheaper.
__________________
'71 Type 1 - Rally Project '58 Type 1 - I bought an early!?! '73 Type 1 - Proper Germanlook project '68 Type 1 - Interm German 'look' project '75 Type 1 - Family Heirloom '93 Chevy 3500 pickup - Cummins Swap |
#14
|
|||
|
|||
Oh..ok I must have seen the oversize piston then.I thought it had the same bore as the 3.8 - my bad. Right you are Mr. Holmes
|
#15
|
|||
|
|||
The cylinders
I saw the cylinders today, man looks nice. I sure better get some air over them, they have 21 fins. I sure need to make sure the 11 blade fan is up to it.
Last edited by effvee; June 14th 2013 at 22:46. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|