|
#1
|
|||
|
|||
Maybe Lanner (flat) is referring to the 87+ rotors (the ones with the 100mm hat height) that have 50mm pad area height even though they are 20.5mm width - I am told this, did not measure myself.
The 289x20.5x71mm rotors have about 46mm pad area height. The 986 rear pad has a height of about 48.5mm so it overhangs a bit. effvee I uploaded some photos. My calipers are not yet attached. I put them on just to see but for the rears there is no room for the whole brake pad. Front: Back: Top (see the overhang, about 2.5mm): kai4130 please report back. addition: The Boxster rear rotor will not clear the handbrake shoes and hub and the Boxster S rear rotor has a bore of 98mm instead of 103mm that we need, so it requires some machining there. xD It also has a height of 67mm instead of 71mm. Last edited by proudbugowner; October 6th 2015 at 15:33. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|