#1
|
|||
|
|||
Turbonutta is back
Hi everybody on the forum, I havnt been around for a while as i have been painting primer (5coats now) and sanding and filling and sanding and filling and sanding and filling and you get the idea.....WHY does PERFECTION take so long....Well it might not be perfect but i have had a good go.
If you look at the attachments i have included a picture of the mounting of my IHIRHB5 Turbo simular to a subaru legacy. The chargecooler is large and is a pre production unit a good friend sourced for me. I will attach a picture of the body work when i have wrestled them out of my diggi cam LOL hope you are mildly interested....NUTTA Suicide doors 2.1type4turbo 17porsche rims |
#2
|
|||
|
|||
Dude...I'm thinking about doing the turbo in the backseat section too. Do you have anymore pics (or links to pics) of the setup? How much hp do you think you'll have? How much boost? Thanks!
Matt F. |
#3
|
||||
|
||||
Good to see you back. Nice progress on the car. :agree:
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe |
#4
|
|||
|
|||
How much bhp do i have matt, thats what i would like to know myself, the engine is in the prossess of being finished of i have put the motor spec below.
i cant wiat to run it(i hope it works) i have a load of photos of the bulkhead area matt if you want to see more its great for gaining alot of space Type 4 case 71x96 Balanced and Blue Printed CSP Deep sump with turbo oil return BAS oil filler pipe Hand made stainless steel exhaust manifold ending in Bentley R Turbo tailpipe GAC Engineered Heads 45in x 37ex La performance pulley CB air boxes Scat manifolds Engle FK7/8 Turbo grind on straight cut gears Shadeck oil pump Kobelshmitt bearings Total seal rings Bosch fuel filter Fuel pump CSP carbon fan shroud Latest model 911 air cooled 12 blade fan Samco black turbo hoses 8 inch Carbon air box/filter IHI RHB5 Turbo charger from Subaru legacy turbo CSP Throttle linkage Bosch heated lambda probe Omex coil pack, air temp, oil temp, map sensor TWM throttle position sensor TWM 45mm quad injector Throttle bodies TWM fuel rails 4x Cosworth green injectors DTA ECU Bailey Re-circulating dump valve One off Custom Charge cooler Custom wiring harness Bosch 12volt water pump Polo 1.4 Radiator Renault 5 turbo fan Custom Blue silicone water hoses i may have left a few bits out but hey i cant type anymore........ NUTTA |
#5
|
||||
|
||||
Nice stuff, I'm very curious how it will run....
What kind of clutchcombo are you going to use? Grtz Robin |
#6
|
|||
|
|||
Hi Blu ,clutch is Porsche 911 and the flywheel is from kennedy the gearbox is a 911sc 915unit thanks
|
#7
|
|||
|
|||
oops forgot to add the photo
|
#8
|
|||
|
|||
The progress is looking good. I'm going to removable rear clip as well, it makes engine removable/install, maintance, rejetting, checking spark plugs... a whole lot easier. That front spoiler is wild, I like . Looks like that engine is going to be a monster. Keep us updated.
Nick |
#9
|
|||
|
|||
Hey supa glad you like the spoiler you should see what i have done at the back if you like the front...???
Has any body noticed the air rams for the deck lid yet???? supa where are you from dude |
#10
|
||||
|
||||
Verry nice car mate!!!!
More pics of it???? pleaseeeeeeeeeeee Wiebrand
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!! |
#11
|
||||
|
||||
Where is that lip from?
That car is nice!!! :agree: |
#12
|
|||
|
|||
The "lip" i take it you mean the front bumper spoiler combo, a few mates and i made it from a few left over bits n pieces, it floats on mountings that come from the front valence.The main purpose is to direct cool air into the front valence were the polo 1.4 liter radiator sits the other(purpose)is to look cool
Im glad you guys like it makes the hard work worth it Cheers race look The water bottle for the rad is mk3 golf, the rad is covered in ally panels Got to go im at work |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|