|
|
#1
November 2nd 2005, 15:36
|
||||
|
||||
|
911 trailingarms rear
Im planning to replace stock trailing arms with porsche units made of alu.
Im running coilover setup. wich arms should i be loocking for? wich is the best fit? Model,year, etc... Vin
__________________
Check out my project pic`s! http://www.v-dubs.no/haraune 
|
|
#2
November 3rd 2005, 09:20
|
||||
|
||||
|
from what I have seen (someone correct me if I'm wrong!), 86 944 turbo ally arms will bolt on with no track increase, there are two other widths from other years, not sure which are which, 911 arms are too long so will lengthen your track..
Rich
__________________
http://www.ricola.co.uk
|
|
#3
November 3rd 2005, 13:06
|
||||
|
||||
|
Lengthening the track isnt nessesarly a bad thing... it would give better weight distribution. But ofcourse more than 30-40mm would be a problem.
__________________
Check out my project pic`s! http://www.v-dubs.no/haraune
|
|
#4
November 4th 2005, 11:26
|
||||
|
||||
|
I have some late model aluminum arms that i'm selling. I would love to use them but I'm using a 993 multi-link rear suspension setup. Let me know if you are interested. They are complete with rotors, hubs, calipers, ebrake cables'... everything. I have the original porsche rubber bushings in them as well as new red urethane bushings, and i have original vw allen style bolts to hold the arms and I also have the new bolts from aircooled.net that use a 20 mm wrench which are $18 each. Fully complete with everything. Let me know and i'll post some pictures of everything.
__________________
1974 type 1 Turbo 6 piston brakes at all corners  Project is taking all my money and it's all Germanlook.com's fault! 98' Audi A4 93' T-Bird (oh yeah!) 90' 911 C2 74' beetle
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
