Quote:
|
Originally Posted by Mikey
Kinda confused, you don't move the rotor. Which I believe is what you're saying. The idea is to move the caliper in, not the rotor out.
Also, from drums to 944NA hubs is about 1" differance.
I havn't installed my ebrakes yet. From what I saw ebrake shoes are expensive, so they'll wait till later. 
When you widen the track, you move the wheel out away from the vehical. |
I'll start off by saying this is not personal experience, but from what others have told me..
The offset of the bell part of the disc from the actual disc on 993 discs is greater than 944 NA, this means that you need to use a 5mm spacer under the disc to stop the disc hitting the caliper mounts on the trailing arm when bolted up. This results in the wheel mounting face being moved out 5mm further per side than the 944 NA parts.
Rich
Is that any clearer?
May 28th 2006, 05:27
Threaded Mode