#1
|
||||
|
||||
Porsche 924 rev counter help
Hi guys, I have a Porsche 924 rev counter that I would like to wire into a Beetle/Type 3
The one that I have is from a '77 924 and has 3 terminals at the back. One that says +12 One that says 1 One that says - (minus) What goes where? Can anyone help? Thanks
__________________
Blitzem with Type 4 power |
#2
|
||||
|
||||
A guess?
+12 is to the +ve on the ignition switch circuit - is earth 1 Is the feed from the coil ??????? Does the unit have a separate circuit for the internal lamp? Clive |
#3
|
||||
|
||||
Yes, it has two plug on connectors for the lights. I guess that you could pull current for those lights from the speedo lights.
Can anyone confirm that it is indeed the correct way of wiring up?
__________________
Blitzem with Type 4 power Last edited by blitzvw; June 11th 2009 at 08:29. |
#4
|
||||
|
||||
That is how I would wire it.
12 to key on power + - to gnd 1 to neg side of coil or tach out of CDI box daisy chain the lights to the speedo lights so they will be on the dimmer with the speedo.
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe |
#5
|
||||
|
||||
Good stuff, thanks
__________________
Blitzem with Type 4 power |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|