996 // 986 calipers Dimensions

[vdubfund]

Hey everyone
This may have been cover before, if so apologies.....
Are the 996 caliper dimensionally the same as a 986 caliper.
Am wanting to use either 993/996 rear discs with 996 calipers with 16" fuchs.
Does anyone know if they`ll fit ( 993 disc is 299 x24mm) Where as 944na rear discs are 289 x 20mm , fronts will either been boxters S discs or 996......

I know the 986 caliper will be fine in the fuchs , but if the 996 caliper is larger will it foul the wheel??? Trying not to use spacers in the rear trying to keep everything under stock fenders. If 16 x 7" dont fit then it`ll have to be 16 x 6" all round.

This will all go on a 64 bug / short S/A with 924S caliper brackets.

993 calipers in the rear would be OK, but I figured there the same as a 944T caliper. And I believe they require spacers with 16" fuchs.

As for the fronts any advise is much appreciated, still undecided.
I have 944 spindles that I was thinking of having cut down and welded to the link spindle....

Cheers
Dean