First pair of Type 1 billet heads are ready. These heads will go with 50x40 type 4 valves to street/strip 90x101.6=2919cc engine which will run with E85 fuel.
Second pair will be for my own 2789cc engine, with 18mm taller top fins and 48x38 with JPM valvetrain parts.
Both engines will use of course TF-1 enginecase
We will be using stock bails with billet valvecovers, but valvecover seal flange at bottom ends have smaller radius, this will make possible to have up to 54x40 valves with pauter rockers.
Naturally i have 94mm bore version and 6-stud version drawings too
July 26th 2018, 17:35
Threaded Mode