#1
|
||||
|
||||
Questions about Steve Cs ride
__________________
STI powered 1303 in the works. |
#2
|
||||
|
||||
Hi
I have ben meaning to pop in here for ages. It looks great, well done. Steve C |
#3
|
||||
|
||||
Hi Steve,
welcome.......you ride is top notch. 2 thumbs up, Alex |
#4
|
||||
|
||||
Right on !
Thats one awesome looking bug. Sandeep |
#5
|
|||
|
|||
Quote:
|
#6
|
||||
|
||||
Excellent job!
You have gone an almost unpaved path with a turbo'd wbx. Very daring and from an engineering point of view very interesting! What is the power output and how is the engine holding up? (how many miles already?, (water) temps?) Good luck! Walter |
#7
|
||||
|
||||
Hi
When I had it dynoed the wastegate was not shutting properly and the injectors maxed out and it ony made 128 hp, I was very disappointed with this. I have not yet changed the injectors but i have tidied up other things, fixed the wastegate and made the exhaust less restrictive. I have some Mercedes injectors to be fitted but Im concentrating on other things at the moment so I hope to get things more sorted early next year. I have had a few encounters with WRXs and R33 Skylines and I clearly came out the winner so it must be making more than 128 now. The motor has been in the car since 1988 but only ran IDAs & 10.5 comp until 2001. The motor has done about 100,000 ks and has only used 2 water pumps and the odd coolant hose in that time, I use VW coolant with distilled water and I dont have any corrosion problems. The oil temp stays around 100 c and water temp around 95 c in very hot weather that we have in Sydney, sometimes over 40 c in summer. Steve C
__________________
STI powered 1303 in the works. |
#8
|
||||
|
||||
fenders?
Where did you get the fenders? are they still made?
__________________
Vincent W. Strader 64 Type I and 73 1303 going GL top to bottom now if i could just decide wich one. 04 Mitsubishi Lancer plans power 13b Turbo Rotary 300 hp Wheels 18" turbo twists inside Sparco blue racing seats Sparco pedels, wheel, and shifter nob Sparco Rep Andrew @ www.pilotracegear.com Good deals on Sparco stuff |
#9
|
|||
|
|||
Hi
Steve's guards are called Areo's You can get them from Vintage Vee Dub Supplies Unit 1 / 11B Harp Street Campsie NSW Australia 2194 Ph 02-9789-1777 Fax 02-9718-8704 the usual 0011 61 in front |
#10
|
||||
|
||||
Steve, How is your 1303 coming along?
__________________
Vincent W. Strader 64 Type I and 73 1303 going GL top to bottom now if i could just decide wich one. 04 Mitsubishi Lancer plans power 13b Turbo Rotary 300 hp Wheels 18" turbo twists inside Sparco blue racing seats Sparco pedels, wheel, and shifter nob Sparco Rep Andrew @ www.pilotracegear.com Good deals on Sparco stuff |
#11
|
||||
|
||||
hey steve and barry!!
|
#12
|
||||
|
||||
Hi Al
Welcome along. Just got back from holidays and Im going to get stuck back into the car now. Steve
__________________
STI powered 1303 in the works. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|