Porsche Track Car,Projects, Parts & Wanted!!!

[racerbvd]

Porches, Projects, Parts & Wanted!!!

1976 911 TARGA rear clip. Make a great Trike!!

912 body, $600 or Trade This is a 1966 Porsche 912 tub that was hit in the front, I have most, but not all parts to fix!!! This would be a great start in building a drag Porsche with a VW engine (no engine or tranny included) full susp.& brakes are included!!!



944 Track car with Broadfoot Racing bodywork (the bodywork has Daytona race history) fiberglass hood, lexan windshield and rear hatch, GT Lemans wing. It is a stock engine except a chip Broadfoot K&N cone filter kit, Jet-Hot coated headers,Broadfoot Stainless exhaust and billet throttle cam. Broadfoot billet euro style alt, mount, Broadfoot billet power pulleys, Full custom cage with nascar door guards, 28MM front Welt bar, Racing Dynamics strut brace, I have adj Konis and 951 brakes, custom boxed stainless control arms (you can replace balljoints on these), but haven't installed them yet, but they are part of the package. 2 sets of 7&8X16 Phone dials, 1 set of 6X15 cookies for rains, 2 sets of 7X15 phone dials for auto-X, TRG drivers set finishes it out. Because of these mild mod, it would have to run GT4 in PCA and SPO in SCCA. It is a very fun and reliable DE car. Also have stock 951 bodywork if needed


951S Package!88 951S Caged race car tub!!!
I have a straight, nice clean 88 951S caged tub. This tub included carbon fiber fenders, roof skin (has the non-sunroof look), carbon nose, lexan windshield, rear hatch & side 1/4 windows, glass GT racing Lemans wing, Glass GT Racing vented header panel, New Broadfoot Racing glass dash some susp., Turbo Cup style strut brace, fully caged, connected at susp points. Have most rear susp, some front & 18" factory twist wheels. Have stock doors for it too!! This is a clean, tub with good paint. include Stock, 89 951S parts car, straight tub, had harness fire (only the hood has burn damage) Mostly complete,


1973 914 with FI 1.7 &side shifter, very solid,BBS style wheels, but about to be painted, disassembled for paint. As is.

Wide body Caged 914 Roller||Street legal race car tub, 73, full custom caged (all susp. points connected), wide body, Chalon slant nose 914 race car roller. Have all lights, bodywork, glass and 911 susp, 7.5&9X17 Cups for it, has fuel cell, needs to be painted. Very trick chassis!!~

A 73 914 That has already been stripped, acid dipped and cut the windshield frame off. I is on a dolly. All the panels are very straight, there is some rocker panel rust, but one of Brads kits could easily fix that. This a a great start for a 914/914-6spider race car!!

1981 VW diesel pick up, 5 speed, GTI seats, topper, alloys.

1950 Chevy 3200 Pick-up, complete, lots of spares, rebuilt susp. &brakes.


[B] 911 PARTS [B]

935 stuff : Factory twin turbo system(off of John Pauls ). Exhaust headers in excellent condition, rebuilt K26's(by factory),intermediate shaft oil pump, cam box mounting brackets, exhaust exit pipes(90 degree turn downs). Anyone wanting to see a picture can look in Anderson's books.

94 3.6 Turbo Heads, no port work other than ceramic coated exhaust ports, 3.6 Turbo P&Cs,8 to 1 compression, Nikasil coated barrels, cylinders have been relieved, rings included and a set of 3.6 rods; balanced with RaceTech bolts.

3.6 Brake Rotors for Big Reds

993 cams

Racing Dynamics Performance Chip,24 pin, # 200.90.10.20, with instructions

930 Intercooler and Wastegate

930 bumper extensions, both factory metal & fiberglass

74-77 911 bumper extensions & rockers

Fiberglass Carrera bumper extensions rockers &bumper ends.

Super Sprint 2 in, 1 out Muffler

66 oil tank

AC underdash unit from 75 911

Complete AC from 76 911 PENDING

Rare Smoked Lexan Autobra for 84-89 Carrera


930 rear quarter

1966 911 Tail lights

1967 911 Complete rear bumper

1973 right & left side bumper ends and bumperetts Early rocker panels

Steering rack

High back seats, need recovering

SC center console, black &brown.

Misc Brown int bits

80 right fender "74 front fenders,

73 hood,doors&bumper
911 Replacement sheetmetal, New in the Box. Sell as a package.
Fender Joining Panel, front, LH
Fender Joining Panel, front, RH
Front floor pedal area section
Floor Half, front section
Floor Half, rear section
Jack Point Brace, LH or RH
Jack Point Tube, LH or RH
Rocker Panel Kit, Left Side Package
Rocker Panel Kit, Right Side Package





[B]MISC. 944&928 PARTS [B]

951 fenders, bumper cover, inner bumper, header panel & headlight covers

1986 ,Front & rear bumpers

Rear 944 1/4

Powder coated Early 944 struts with adj coil over perches

1986 doors, mostly complete, red

Rough 944 Turbo nose cover(NO lights, header panel, inner bumper support, ect) and straight, nice but needs paint 944 Turbo fender.

88 951S Air Bag steering wheel with bags, dash bag, harnes and brain.

Interior rear view mirror Ashtray Tape carrier

Sunroof wind deflector Horns
Sun Roof bags


Early stock swaybars

Locking gas cap

Alarm switch

Front &rear side markers

Front suspension Alloy rear control arms

Throttle body &intake manifold

924 Snail Tranny parts

1986 928s hatch with spoiler

1989 928S4 Tail light,

[B]Race Fiberglass [B]

Rear 1/4s for 74 on RSR 14"

RSR/934 front Bumper

IROC Tail

One 935 front fender

[B] MISC. 914 PARTS [B]

Early &late window regulator

Early heads

Console with gauges

light assembles

engine lids

Doors, early &late

Complete AC system

Front &rear decklids

[B]Wheels [B]

6&8X16 C2 rims freshly powder coated silver

7&10X15 Centerlines, wide &light

7X16 BBS 3 piece wheels 5 on 4.5 35mmET NON-Porsche

1 4.5X15 356 wheel, date code 60, powder coated silver

7x16 phone dial,early 928

1 7X16 Etoil 5 star(new) WILL TRADE,WANT FUCHS



WWW.BVDMOTORSPORTS.COM

http://members.rennlist.com/racerbvd/

MANY PARTS TO TRADE

[danny8774]

could you email me some pictures of your wheels Casper0587@hotmail.com thanks
Danny

[racerbvd]

Originally Posted by danny8774

could you email me some pictures of your wheels Casper0587@hotmail.com thanks
Danny

Which wheels?? You have mail