GermanLook Forums  

Go Back   GermanLook Forums > General > Project Builds

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old October 29th 2015, 22:58
SuperRSi's Avatar
SuperRSi SuperRSi is offline
Registered User
 
Join Date: Sep 2002
Posts: 518
GL Meyers Manx Signature #85

Hello All,
I am going to start a thread on my Meyers Manx project. It was originally purchased to share the build with my 14 year old daughter. When I was 15 I was working and decided to spend my money on a Meyers Manx about 1970. I did however forget to tell my parents. So when the body came to the house it took a couple weeks for them to decide that it could be a cool project with our Dad. I wanted to continue and do it with my daughter. The body took over two years to deliver and by that time she just wanted a car with A/C and windows.

The body sat on the top of the pallet rack at the shop for several years then I decided to build it. I started with a Berrian frame and decided to make it a Pikes Peak race car. I bought a set of front and rear suspension from Mendeola and in a sign of the times then it took a very long time to get them. In the mean time I dug out a 930 transmission I had on a pallet from another project.

I commissioned a well known Subaru fabricator to build a turbo system that was similar to the set up on the Porsche RSR Turbo from 1973. This fabrication ended up with beautiful welds but some rather interesting lapses of intelligence, like it was all built on a bare block without the front accessories. This meant you could either bolt on the bracket to hold the dry sump system or you could bolt on the factory oil pump that is needed for pressure. So then the other issue became clearance to the harmonic balancer he never used. As a result this engine project was pushed aside as I went back to work to pay for the great job. About the same time, the powers that be decided the car would run in the Unlimited class against the $8 Million Dollar Peugeot that Sebastian Loeb ran at Pikes. Manx out of that race.

So in 2015 I pulled it out again to finish it up and put the 2.3 Type IV I had for sale here in it. I will show a bunch of photos from various stages, various seats, various wheels, engines etc. I have learned that time is my enemy as I change my mind more than any woman I know. Also as the years have gone by I have been working hard and suddenly a really cool part comes out. Not that it replaces a crappy part, it's just cooler. So in comes another change.

So here are the specs as I hope to roll it out the door before the end of the year.

Chassis
Berrian chassis with front end and rear frogs cut off, originally to squeeze the 930/Suby in.
Mendeola front and rear suspension with Fox coil over shocks
OBP Aluminum Pedal group, hydraulic clutch and brake, bias adjustable, cable throttle
OBP Drift brake

Interior
Recaro Profi XL seats
Shroth Endurance 6 point belts
996 yellow standard belts
Spa Dash

Suspension and Brakes
Mendeola front and rear suspension
Fox shocks
Performance Friction 2 piece front rotors Cayman S
Brembo rear Cayman S rotors
Front and rear 4 piston Brembo Porsche brake calipers

Wheels and Tires
996 TT hollow spoke wheels 8 front, 11 rear / 18 inch
Tires Falken Azenis front 245 rear 315/18 inch

If I think of anything else I will adjust this. I will post pictures as I can off of Photobucket.

Thanks
Randy
__________________
Meyers Manx Signature #85 , 79 Convert
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:38.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved