GermanLook Forums  

Go Back   GermanLook Forums > Technical Section > Wheels

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old April 19th 2020, 22:49
sheller's Avatar
sheller sheller is offline
Registered User
 
Join Date: Mar 2005
Location: Portland, OR
Posts: 8
Wheel fitment issue

Ok, the last couple of weeks I have been able to work on my '73 Super. In the front I have switched to Maxx Struts (yellow springs) and disk brakes (with new bearings and stuff). The rotors are drilled to a 4x100 pattern and have studs pressed in.

So I have a set of 15" Motegi Traklites (gen 1) that I had new tires put on last week. When I put them on the rotors, they did didn't seat correctly due to the flared, back edge of the dust caps. The center of the rim was hanging up on it. I have gotten 1/4" wheel spacers and the rim seems to sit OK now but it is just making contact with the bottom edge (the bolt) of the ball joint. Adding a 2nd spacer provides plenty of clearance but when there isn't enough left on the studs to effectively put the lug nuts on.

Is it OK to cut the bottom bolt of the ball join to get some clearance? If so, how much clearance is necessary to not have them touch when I am driving? Is there something else I can do to provide more clearance? It should be noted that I am on the very top "ring" of the struts, so the least amount of lowering. Also, the front sway is not currently in the car. I removed the stock one to put a larger diameter one in and am currently waiting on the caster adjusting bushings for the larger diameter from Topline before I can install it.
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:16.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved