#1
|
||||
|
||||
Which axles to use with al 944 arms?
I need to know which axles I need to use with my early 944 Turbo aluminum trailing arms. I am concerned about the length of the axle.
Do I need to get 944 Turbo ones or can I just take 944 ones? Is there a length difference? Thanks a lot, Alex |
#2
|
||||
|
||||
I don't know if the early aluminum trailing arms and the late aluminum trailing arms have the same axle lenght but I think they do. I am using a set of 1987 944-S axles with my stock type 1 tranny and 1987 944-S late aluminum trailing arms. The axles are 21-1/4'' long. They do not bind or bottom out at any point of the suspension travel. They use the VW spline so type 1 and type 2 cv's will slide right on. They are a little thicker in the middle but you can still get the type 1 cv boot over the axle. Hope this helps.
__________________
I love my money pit, uhm, err, I mean my car. 1969 beetle in the works... 2.0 type 4 DTM... 2004 Suzuki GSX-R 1000 crashed www.volksport.net Volksport Kfer Gruppe |
#3
|
||||
|
||||
here is a pic.
__________________
I love my money pit, uhm, err, I mean my car. 1969 beetle in the works... 2.0 type 4 DTM... 2004 Suzuki GSX-R 1000 crashed www.volksport.net Volksport Kfer Gruppe |
#4
|
|||
|
|||
boygenius,
what is that rear wheel, and what offset? Alex, The early 944's used 16" axles, same as type 1. |
#5
|
||||
|
||||
Quote:
No wheel spacers needed. Plenty of clearance with the tires on with late aluminum trailing arms. Hope this helps.
__________________
I love my money pit, uhm, err, I mean my car. 1969 beetle in the works... 2.0 type 4 DTM... 2004 Suzuki GSX-R 1000 crashed www.volksport.net Volksport Kfer Gruppe |
#6
|
|||
|
|||
looks good on there, thanks.
|
#7
|
||||
|
||||
So I need Turbo or S axles that were on a car with the al arms?
Alex |
#8
|
||||
|
||||
alex, i can't seem to find it, but several months ago we had a very detailed thread on options in this area including output flange and CV options. i still have yet to fit mine up. that will be happening in the next two months though.
__________________
zen '73 2316 TIV GL Standard Bug (quasi) Company Branding, Graphic Design, and Web Services at DigiVinci Design |
#9
|
||||
|
||||
I use www.pelicanparts.com as a cross referance manual.
They are showing that these axle assemblies are the same. Manual transmission only. 1. 1985 1/2 - 1987 (944 and 944S) 2. 1987-1988 (924s) 3. 1986 (944 turbo) 1987 and later turbo axles use a differant spline pattern than VW so you would have to use only porsche cv's. Hope this helps. If you need any more specific measurements let me know.
__________________
I love my money pit, uhm, err, I mean my car. 1969 beetle in the works... 2.0 type 4 DTM... 2004 Suzuki GSX-R 1000 crashed www.volksport.net Volksport Kfer Gruppe |
#10
|
||||
|
||||
Quote:
I don't know how to make a link out of it, sorry.
__________________
I love my money pit, uhm, err, I mean my car. 1969 beetle in the works... 2.0 type 4 DTM... 2004 Suzuki GSX-R 1000 crashed www.volksport.net Volksport Kfer Gruppe |
#11
|
||||
|
||||
Doh,
I should have used the search function. Got the info I needed. Thanks a lot guys, Alex |
#12
|
||||
|
||||
let us know how it goes alex. yeti sent me some axles off of a vanagon i plan on using.
i got my arms prepped for removal today. just have axles, trailing arm mount and spring plate and they are out.
__________________
zen '73 2316 TIV GL Standard Bug (quasi) Company Branding, Graphic Design, and Web Services at DigiVinci Design |
#13
|
||||
|
||||
Well I guess I will call some Porsche wreckers tomorrow or after new years to find some axles. I need 540-550mm axles from a 86 Turbo (I read so in the other thread). Those vanagon ones should work too.
Alex |
#14
|
||||
|
||||
Try ebay for your axles. I got both of mine for $140 including shipping, from my experiences wrecker yards usually want double what the part sells for on ebay.
__________________
I love my money pit, uhm, err, I mean my car. 1969 beetle in the works... 2.0 type 4 DTM... 2004 Suzuki GSX-R 1000 crashed www.volksport.net Volksport Kfer Gruppe |
#15
|
||||
|
||||
944 rear susp $$$$$
i found rear susp off a 87 944, axels arms rotors calipers ect. what is this worth? thanks!!!!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|