|
#1
|
||||
|
||||
A few things
Hey all,
Well bad news, my motor has to come apart Basically what happened was i started hearing a weird noise coming from the clutch area. After pulling the motor to investigate, turns out the pilot bearing is effed. But that's not all i found! I take the gland nut out, only to find my flywheel really loose on the dowels.... So i pull it off, and the dowels fall out of the crank! I look at the dowels and they have been peened all over their circumference. (It's a dirty trick to make the dowel a few thou bigger to make them a nice press fit in the hole) The rest of the crank is beauty, real nice piece. But because of some lazy goon, who reamed the crank a thou or to over, they had to make the dowels a little bigger to fit! Now the dowel holes are all ovaled, and i'll need to put in a new crank! Not a happy camper.... On a related note, does someone have a decent stock peashooter exhaust? (stocker is going back in!) Alex
__________________
1970 Bug 2110cc. ???Whp, ???Ft/Lbs |
#2
|
||||
|
||||
That sucks big time! Where did you get that crank? Flywheel? Who assembled?
BTW buy the same exhaust as i did for my stocker. Call Greg.
__________________
'72 super '65 bus '52 split |
#3
|
||||
|
||||
The car was running PERFECT too. Everything was sorted out (so I thought )
Cip1 crank http://www.cip1.ca/ProductDetails.as...ode=C13%2D8180 Bruck flywheel:http://www.cip1.ca/ProductDetails.as...C%2DC10%2D5099 Pat and I assembled it. I'll give Greg a ring, Alex
__________________
1970 Bug 2110cc. ???Whp, ???Ft/Lbs |
#4
|
||||
|
||||
I'm assuming you 2 didn't centerpunch the dowels. The dowels were in the crank when recieved?
Cip1 crank http://www.cip1.ca/ProductDetails.as...ode=C13%2D8180 Bruck flywheel:http://www.cip1.ca/ProductDetails.as...C%2DC10%2D5099 Ouch..... seeing those prices hurts. I paid a small fortune for my crank and flywheel. Well over 1K. Never mind the drive to Fisher Buggies in Florida, to pick it up! What'cha doing for a replacement? Pete
__________________
'72 super '65 bus '52 split |
#5
|
||||
|
||||
Pete,
I'm about 8 months away from being a licensed machinist We didn't peen the dowels. They came like that, installed from the factory. Not too sure yet on what I'll replace it with. Something bigger probably. Maybe a flanged unit Alex
__________________
1970 Bug 2110cc. ???Whp, ???Ft/Lbs |
#6
|
||||
|
||||
That Hurts
Sorry to hear about your Crank Alex, I feel your pain you have worked so hard on your motor. Well this is a good time to plan to go bigger, if it's going to be more efficient and the same money. I wish I could help but ya know I am limited in that area.
Good Luck
__________________
Big Daddy/ VW EGO Lets Gooooo |
#7
|
|||
|
|||
Hey! Can you please explain what you mean by centerpunched? A pic will be nice too You know what they say about pics eh?
Thanks! Wlex, sorry to hear about your misfortune. That sucks. Cheers!
__________________
Zeroaxe |
#8
|
|||
|
|||
Stock Exhaust
Alex,
I think I have a stock exhaust at my parents place. I will check this weekend. Jamie |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|