#1
|
|||
|
|||
Stuck Transmission After Rebuild
I has a gearbox re done with Quaife and close ratios. Put it in the car and it got stuck between gears. Retuurned it to the builder and they said once I put oil in it and a motor attached to it then it wont be so stiff and should loosen up. They took off the nose cone and squirted some oil in around the hockey stick . I replaced it and it still wont shift . Sounds dodgy but has any one ever had this scenario. Wouldnt it just be set up wrong in the first place and thats the problem?/
David
__________________
Give it 2332cc,Compress it ,port it and "Yeah Baby" |
#2
|
||||
|
||||
what do you mean it got stuck between gears? have you filled it up and driven it? or just fitted it and played about with the shifter?
|
#3
|
|||
|
|||
Hi,
it really can happen. Know it from Porsche 915-gearboxes, where it happens sometimes. What type of gearbox do you have? If it was a Porsche-gearbox the problem is easy to solve. Martin |
#4
|
|||
|
|||
I was told once that you do not want to dry-shift a transaxle.
Especially a new one... Get the motor running and the clutch adjusted and see how it shifts. An old-timer once told me that you can do damage yanking on the lever of a new transaxle withot everything spinning.... |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|