#1
|
|||
|
|||
Porsche code ?
What offset is a 928-361-616-00 rim, phone dial? Thanks for the info.
Isn't the offset usually stamped on the rim somewhere? JR |
#2
|
||||
|
||||
It is usually displayed as ET40 or ET50 ect...
__________________
I love my money pit, uhm, err, I mean my car. 1969 beetle in the works... 2.0 type 4 DTM... 2004 Suzuki GSX-R 1000 crashed www.volksport.net Volksport Kfer Gruppe |
#3
|
|||
|
|||
Any help here, I need to know, the sooner the better. I thought they would be 23 or 52, not 40 or 50? Any help though would be great..Thanks JR
|
#4
|
|||
|
|||
Boy sorry if you where just using that as an example........
|
#5
|
||||
|
||||
JR, you working on some other rims also?
they should have an et52.3 or et23 for phone dials.
__________________
WinterJam 2010: Vdub, Surf, Skate & Musis Fest WinterJam 2010 'I drive way to fast to worry about cholesterol!' '67 Sunroof Notchback * '68 FI Squareback |
#6
|
||||
|
||||
Quote:
__________________
I love my money pit, uhm, err, I mean my car. 1969 beetle in the works... 2.0 type 4 DTM... 2004 Suzuki GSX-R 1000 crashed www.volksport.net Volksport Kfer Gruppe |
#7
|
|||
|
|||
I have the same wheels 16x7 phone dials
i did some measureing yesterday on my wheels 6 5/16" backspacing or 160mm and if my measurements were good offset is 2.4375" or about 62mm
__________________
Thorkhild Darkside Apprentice 68 VW Blue Fasty |
#8
|
||||
|
||||
they are 928 rims look in a reference for 928 wheel et for the same width and diameter wheel they did not chage them that much
if thats a help i have some 7" x 16" 928 gullidecks (flat face with a slot cut out) the ET is 65 search 928 rims on the net.. |
#9
|
|||
|
|||
The only listing that I can find for that part number has a "-85" under remarks. This may or may not be the ett of the wheel.
Try a search on the web? Good luck, Dave
__________________
'70 GL Bug, T4 Powered! www.boxerautogruppe.ca "Don't tell me the sky's the limit, when there are footprints on the moon" |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|