#1
|
||||
|
||||
928 GTS brake info REQUIRED
To all the big brake people out there..
I have a 68 karmann cabrio beetle project that i have a full set of 928 GTS rotors and calipers also some 944s2 front carriers that i wish to fit with a bearing sleeve kit to run porsche bearings... the question is:: i have the original 928 GTS discs front & rear will the fronts fit the spindles or will the be too deep and hit the steering/suspension knuckle/ball joints and will the rear discs fit as 944 style (will be running early 944 ali arms..) any help would be great (pictures, advice or tech pictures ..) chris |
#2
|
||||
|
||||
Hey Chris,
As I said via email, with the MBT front kit the GTS rotors fit, but they are real close to the arms. I have since converted the Manx back to its Volks roots and installed a set of CSP vented fronts. Just did not need the weight of the 928 system without using a big engine. I am using the system on my Super Convert, but using 944T front spindles. Good luck, Randy
__________________
Meyers Manx Signature #85 , 79 Convert |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|