#1
|
||||
|
||||
944s arms, 968 rotors, 968 calipers
I have 87 944s alum arms. Found some 95 968 calipers. Will these bolt on, if so do I use 968 rotors? I've looked and searched and from what I've found
I'm pretty sure they will, but I want to be 100% sure before I buy. Thanks. |
#2
|
||||
|
||||
Check this link to Lanner's site or just give them a call. I am sure he can help.
http://www.vdubengineering.com/techn...onversions.htm |
#3
|
||||
|
||||
Thanks. I have looked at the site already, but no definitive answer. I called him, but no answer.
|
#4
|
|||
|
|||
Use the 87-88 944 rear turbo disk or 92-95 968 rear disk (they are the same part) and the 968 calipers will bolt up fine.
The rear calipers from 86-91 944 Turbo and 968 are the same, so both will work. Porsche robbed alot of existing parts bins when they made the 968. FYI: 993 rear calipers are dimensionally the same as well except the Porsche script is not raised on the caliper face, rather smooth with a sticker. Lanner |
#5
|
||||
|
||||
Thanks Lanner. Good talking to you today. Ordered the parts today.
Now my build can continue. I'll be ordering some parts from you also. |
#6
|
||||
|
||||
All parts are now installed and it looks like I will have to run the 3mm spacers to center the caliper. Mock up is finished. Time to pull it apart, blast and powder coat.
__________________
My website....http://www.badassdubs.com/ |
#7
|
||||
|
||||
Looking good so far man!!
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|