GermanLook Forums  

Go Back   GermanLook Forums > Technical Section > Suspension

Reply
 
Thread Tools Display Modes
  #1  
Old March 22nd 2006, 20:54
gsusmaniac gsusmaniac is offline
Registered User
 
Join Date: Feb 2006
Posts: 96
So...I am on my way! (kinda)

Ok, so here is my car... I am not sure how much I have the front lowered, but it is quite a bit!

These are my struts... I bought the adjust-a-struts (from K1) Lowered all the way...

This is my disk brake setup...(also from K1) They are brembo rotors and calipers!

These are my wheels... I am currently running 195/50/r15's on the front with 165/85/r15's out back. I plan on running the 165's till I were all four out. Then I will get some 195's of 205's for the rear.

A problem I have... My steering wheels is loose. Like, really loose. I can move it up,down, in, and out possibly over an inch! What is the deal with that. I know when I pulled the gas tank, the bolt that hold the knuckle underneath was almost sheared all the way through! Yeah I replaced that real quick!

So what is my next step in my suspension set-up? I am trying to decide if I want to finish my T4 1.8, or get my car handeling first! I think handeling before power. What about you all?

My Ideas...
-Strut tower brace
-7/8 sway in front with 3/4 in rear
(Should I use a lowered sway bar?)
-Someday disk in the rear with an F1 proportion valve

Thanks for the advice! If I left anything out ask.

-E
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:24.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved