944s arms, 968 rotors, 968 calipers

[badassdubs]

I have 87 944s alum arms. Found some 95 968 calipers. Will these bolt on, if so do I use 968 rotors? I've looked and searched and from what I've found
I'm pretty sure they will, but I want to be 100% sure before I buy. Thanks.

[vdubzack]

Check this link to Lanner's site or just give them a call. I am sure he can help.

http://www.vdubengineering.com/techn...onversions.htm

[badassdubs]

Thanks. I have looked at the site already, but no definitive answer. I called him, but no answer.

[flat]

Use the 87-88 944 rear turbo disk or 92-95 968 rear disk (they are the same part) and the 968 calipers will bolt up fine.

The rear calipers from 86-91 944 Turbo and 968 are the same, so both will work. Porsche robbed alot of existing parts bins when they made the 968.

FYI: 993 rear calipers are dimensionally the same as well except the Porsche script is not raised on the caliper face, rather smooth with a sticker.

Lanner

[badassdubs]

Thanks Lanner. Good talking to you today. Ordered the parts today.
Now my build can continue. I'll be ordering some parts from you also.

[badassdubs]

All parts are now installed and it looks like I will have to run the 3mm spacers to center the caliper. Mock up is finished. Time to pull it apart, blast and powder coat.

[wrenchnride247]

Looking good so far man!!