GermanLook Forums  

Go Back   GermanLook Forums > General > Project Builds

Reply
 
Thread Tools Display Modes
  #1  
Old April 1st 2008, 09:56
Sandeep's Avatar
Sandeep Sandeep is offline
Administrator
 
Join Date: Aug 2002
Location: Brampton, Ontario, Canada
Posts: 1,795
Down and out in 2008

Hi Guys,

Looks like I will not be able to make any 2008 dates for shows / meets with the beetle

I've been meaning to replace the floor pans and heater channels as the rust has been getting worse every year. My motor build is behind schedule so I've made the decision to pull the insurance for a year and get this fixed properly.

I've got the tools and will be doing the work myself, I've ordered the Bug-Me DVD's to help so hopefully I can get it right the first time.

I'll try to make some shows with the Honda and show some support ... its looking like 2008 is THE YEAR to be rolling (Thanks to Lanner) as there are many VW related activities planned.

Maybe we can have a meet at my place ... a "raise the body off the pan" meet ... I've got a BBQ and a patio in the back .... Would be cool to have the front yard covered in VW's ...

Later

Sandeep
Reply With Quote
  #2  
Old April 1st 2008, 15:31
gonebuggy's Avatar
gonebuggy gonebuggy is offline
Registered User
 
Join Date: Apr 2007
Location: Canada
Posts: 308
Sandeep,

Sounds like a plan! Floors and channels aren't too bad if you take your time. I've done em both! if you need a hand just holler! and if you need any tools just let me know, I got 'em all!

Let's get Sandeep rollin!

Alex
__________________
1970 Bug
2110cc. ???Whp, ???Ft/Lbs
Reply With Quote
  #3  
Old April 1st 2008, 15:48
chug_A_bug's Avatar
chug_A_bug chug_A_bug is offline
Registered User
 
Join Date: Apr 2006
Location: Canada, Ontario,
Posts: 1,179
hey Sandeep that's To bad but like Alex Said it's that that hard of a Job to do the Floors and channels I have a 110 welder if ya Need and other Fab and Body Tools too. I'm Down for A BBQ and pullen a body off the pan lol

I know you Said you were Behide but have you gotten a Chance to take Some pics and Measurements for that 901 I'm ready to pull the motor and tran this Weekend coming,

Soo Common guys Lets help him out

Chris.
Reply With Quote
  #4  
Old April 1st 2008, 16:38
flat flat is offline
Moderator
 
Join Date: Dec 2002
Posts: 675
Too bad bro, we'll miss the yellow monster.

Fire up the grill, burn some meat and I'm there. But that theory can turn on you.... I had a BBQ/pond digging party a few years back. I have nasty clay in the backyard, and digging is a killer. Well, all the boys and girls showed up, had a good meal, a few drinks...a good time all around. BUT, the festivities monopolized the schedule, and one (yes one) guy actually grabbed a shovel..... Still was fun though

BTW: Anyone need any pond goldfish? These guys are worst than bunnies...

Lanner
__________________
www.vdubengineering.com
Instagram: vdubengineeringcanada
Reply With Quote
  #5  
Old April 1st 2008, 19:17
petevw's Avatar
petevw petevw is offline
Moderator
 
Join Date: Jul 2002
Location: toronto, ontario, canada
Posts: 1,348
Booo that sucks, i'll miss it. Was watching the compilation clip on youtube yesterday.

I'll help pull the body.

My suggestion, keep the beers locked. I have a fridge in the garage. When people come by to help, they help themselves to the fridge, and we talk BS while nothing gets done. I will be installing a padlock on the fridge very soon.

Lanner, I'll take some Goldfish. The pond isn't opened yet.

Pete
__________________
'72 super
'65 bus
'52 split

Last edited by petevw; April 1st 2008 at 19:41.
Reply With Quote
  #6  
Old April 1st 2008, 19:28
gonebuggy's Avatar
gonebuggy gonebuggy is offline
Registered User
 
Join Date: Apr 2007
Location: Canada
Posts: 308
Quote:
Originally Posted by petevw View Post
Booo that sucks, i'll miss it. Was watching the compilation clip on youtube yesterday.

I'll help pull the body.

My suggestion, keep the beers locked. I have a fridge in the garage. When people come by to help, they help themselves to the fridge, and we talk BS while nothing gets done. I will be installing a padlock on the fridge very soon.

Pete
Sounds like my garage!

Alex

P.S. was that the vid i tossed together?
__________________
1970 Bug
2110cc. ???Whp, ???Ft/Lbs
Reply With Quote
  #7  
Old January 2nd 2010, 16:34
big daddy's Avatar
big daddy big daddy is offline
Registered User
 
Join Date: Apr 2005
Location: Grand Valley, Ontario
Posts: 111
Looks good Sandeep, your really commited you did all that work on your own? Will ET of finish, is by summer?

Good Job
__________________
Big Daddy/ VW EGO
Lets Gooooo
Reply With Quote
  #8  
Old January 2nd 2010, 18:43
Sandeep's Avatar
Sandeep Sandeep is offline
Administrator
 
Join Date: Aug 2002
Location: Brampton, Ontario, Canada
Posts: 1,795
You need a primer to bond to the POR 15 called Tie Coat primer made by POR 15. Other paints then bond to the tie coat primer.

I have a BBQ propane tank with a heater attachment, so the area around the pan stays at about 15C

All work has been done by myself. Now I just have to bolt the whole thing together

Summer 2010 is the goal.

Sandeep
Reply With Quote
  #9  
Old January 2nd 2010, 19:50
fast Ed's Avatar
fast Ed fast Ed is offline
Registered User
 
Join Date: Dec 2008
Location: Caledon, ON, Canada
Posts: 118
Nice work Sandeep, props on keeping the project going. My attention span is way too short for long-term ones like that, I need to be able to drive it!!

Remember I'm not far away from you, if you find yourself in a situation where you need an extra set of hands while working on it.

Looking forward to seeing the car and getting a ride in it this summer.


cheers
Ed N.
__________________
67 Beetle Sedan
95 Taurus SHO
89 Mustang GT
Reply With Quote
  #10  
Old January 4th 2010, 15:12
CLKWRK's Avatar
CLKWRK CLKWRK is offline
Registered User
 
Join Date: Aug 2002
Location: St. Catharines, Ontario
Posts: 382
Looks really good Sandeep! Cant wait to see this monster back on the road.
I am stuck at the "wait for bodyshop" stage, my goal is also summer 2010
__________________
GL ghia restoration:
http://s473.photobucket.com/albums/r...20restoration/
__________________________________________

Last edited by CLKWRK; January 4th 2010 at 15:21.
Reply With Quote
  #11  
Old January 4th 2010, 19:11
NO_H2O's Avatar
NO_H2O NO_H2O is offline
Administrator
 
Join Date: Aug 2002
Location: Stockbridge, GA.
Posts: 2,810
Good stuff. You will love the Tilton pedals. I have installed a set in the Herbie X project. There are some problem ares you will have to work around but they will fit and work. I want to put a set in my car but have not had the time or funds to do it.
__________________
NO_H2O
72 1302 Smack Black GL
73 Bus (2L CIS Powered)
66 Beetle, 73 Standard Beetle
72 Pinzgauer 710M
Volksport Kafer Gruppe
Reply With Quote
  #12  
Old January 10th 2010, 02:54
Sandeep's Avatar
Sandeep Sandeep is offline
Administrator
 
Join Date: Aug 2002
Location: Brampton, Ontario, Canada
Posts: 1,795
Another Saturday, some more progress










And a Christmas present from Santa



Sandeep
Reply With Quote
  #13  
Old January 10th 2010, 08:22
Xellex's Avatar
Xellex Xellex is offline
Registered User
 
Join Date: Sep 2007
Location: Bucharest, Romania
Posts: 274
Sandeep, what brand are the throttle bodies? And how do the air filters get mounted on those?
Oh, and nice project going on there, I love everything about it
__________________
www.vw1303s.com
Reply With Quote
  #14  
Old January 10th 2010, 10:47
Sandeep's Avatar
Sandeep Sandeep is offline
Administrator
 
Join Date: Aug 2002
Location: Brampton, Ontario, Canada
Posts: 1,795
The TB's are tapered 50mm / 45mm extrudabody.com units that flow more than 48mm TWM's. All the information is on their website.

Sandeep
Reply With Quote
  #15  
Old January 10th 2010, 15:29
gonebuggy's Avatar
gonebuggy gonebuggy is offline
Registered User
 
Join Date: Apr 2007
Location: Canada
Posts: 308
Looking fabulous Sandeep! I have faith it will be done this summer!
That gearbox is HUGE!

Alex
__________________
1970 Bug
2110cc. ???Whp, ???Ft/Lbs
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:54.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved