Locked Out
 

unable to open the bonnet, seems like the pull-cord catch has dropped. :angry:
does anyone know how to gain access without damaging the bonnet. :confused:

cheers

http://www.midsouthvw.com/TechTips/t...eningTrunk.htm

Scroll down to the bottom. Last option is your solution.

-Dave

cheers Dave.
will give that a go. :eek:

Not as scary as it seems.

I would recommend using a large bung for the rear of the spare wheel well and rigging up a piece of wire for in case of future failure

Hi

If you move the lever towards the side it will go past its normal stop rest.

This is what you need to do with lever to get just a bit more travel that can sometimes pull the cable enough open the bonnet. You pull the lever over so that it can go past its normal stop.http://forums.aussieveedubbers.com/v...1199&aid=86372

Other than that you can cut the bonnet handle to release the lock.

I always fit a secondary cable release under the mudguard.

Steve

PS I had trouble loading this photo, let me know if you cant see it

thanx 4 the info

ps unable to see the photo

Hi

I cant understand what's happening, I cant load this photo, its only 72 kb. I will try to send it in a PM

Steve