|
Dash pictures
Ok sorry for the delay have been very busy. Here are some pictures of my dash, i have added a little carbon fibre plate around guages on my one, they fit supurb! I just drilled a hole and screwed mine driectly to the original mounts between door and side of dash. The steering column also gives it support. Obviously it is a bare dash, you can fit what ever guages you like where ever you like. I have cut and mounted the original switches too, had to make some little and as many as you like. I also fitted my original switches in place has to cut small holes and fabricate small brackets to hold these. To be honest i would rather sell the whole mould to be frank, once an article has gone then the rest is history and as others know replicas are garanteed. I spent hrs and hrs fabricating this one off to replicate a 911 as close as possible, I have not seen another as good. Let me know your thoughts on this? Regards Brent
Can someone help? i simply cant attached the pictures? have tried 10 times.
|
February 14th 2012, 18:02
Threaded Mode