Coilover problem

[1303R]

ok, was thinking today bout this, soooooo busy at work. why not jus weld the turbo mounting plates onto the struts you got? or onto any strut for that matter
al

[andy1303]

On my car I bought a weld-on threaded tube to convert to coilovers. However, with a 54mm diameter tube my maths says the tube wouldn't fit. So I'm with 1303R on this one.

Andy

[Eliasson]

Hello
I have thougt about it during the weekend. And I will try to use the lower end of the 944 T stut and weld it thogether with the upper end of a 1302strut. I will come back with some puctures if it works.