|
Hi and welcome to the site.
You can check the tech articles on the main site for some help for Porsche 944 and 951 brakes and also try using the search on this forum on the same topic.
My tech article has drawings with measurements for machining the Porsche hub to use it with the standard beetle spindle.
The rear is a near bolt on. If you use the 944 trailing arms you need to take out the big bushing and replace it with a VW bushing. Some modifactions need to be done to the e-brake cable to make it work but that is it. All the info is already posted.
Alex
|
June 7th 2003, 07:35
Threaded Mode