996 brake size- help!

[vwdave]

Hi guys,

Does anyone konw what size rotors the front 996 brakes use?
Any idea on piston sizes for the calipers?

Thanks in advance for the help

Dave

Hi vwdave, I see this is one of your first posts here so let me say welcome.

If you look around this forum you may notice that I answer a lot of these types of questions but I wanted to let you know that I can't here.

Just so every one will know my research is soley based on the 924/931/944/951/952/968 because they share the same suspension as the 113 (Super Beetle 1303).

I haven't really looked into the other chassis/brakes much so I can't answer here. My point is that I wish I could help but can't and wanted to let you know so you didn't wonder why I didn't answer.

[Sandeep]

I beleive the base 996 uses 318x28mm front rotors and 299x24mm rears. Not sure on the piston sizes for the calipers though.

Sandeep

Sandeep, I looked your information up in the MBT catalog and you are correct but they don't list pistion sizes either.

[vwdave]

yep, 318mm x 28mm seems familiar, now that i think about it. I wasn't sure whether the rotor was 28mm or 32 mm thick.

Thanks Sandeep, and thanks for trying Superman; at least I'll know that if you had have known the info then you would have been kind enough to share it with a fellow germanlooker, even if mine is a standard not a super!!

Dave

Originally posted by vwdave
thanks for trying Superman; at least I'll know that if you had have known the info then you would have been kind enough to share it with a fellow germanlooker, even if mine is a standard not a super!!

Thank you and yes I am here to help, no matter what Type or year you have. I'm not one of those closed minded people, I love all VW, Porsche, & Audi cars and devote my spare time to helping our community.

[vwdave]

By the way guys, I just found out that the piston sizes are the same as 944 S2 Calipers, 36mm and 40mm.

Later
Dave