944T calipers on NA spindles?

[Michael Ghia]

1986 only 944 Turbo (951) uses the same hubs as the early car but uses thicker disks, just buy some disks and they will match the calipers.
If you can find a competent welder (it will have to be Tig) then you should be able to have the spindle welded to accept the caliper.
The other way of doing it is to find the 1986 only front turbo hubs but... they are not drilled for the speedo hole so you then another problem!
At the back.. use either 944 turbo/944 S2 or late 928S2/928S4 etc rear disks. Again these will match the caliper for width and... you will need 4 porsche spacers which are used when Porsche bolted on the 4-pot calipers onto the 944 and 968. They should be pennies.. pat number 999.025.131.02
Mike Ghia