Megasquirt

[Sandeep]

Check it out ...

http://www.bgsoflex.com/megasquirt.html

Sandeep

[jhelgesen]

I've been collecting parts to build a system for my 3.0 porsche. So far I have a ford mustang throttle body and racing injectors, pretty much just need the controller and a few sensors. It's been done a few times on 911's so far, and there is a link to someone who used it on their t4 bus on the megasquirt website. Used most of the stock injection.

I'd like to build a system for my GL vert, but getting intakes to work with a 911 or any other upright t4 cooling shroud will be the hard part.

[Supa Ninja]

That's the question I'm having, throttle body or port injection with a custom plenum. What do the 911 guys do for FI?

Nick

[jhelgesen]

The 911's aren't hard because they already have CIS systems from 74 and up. Just a matter of yanking all the old CIS stuff off the intakes and making adaptors for the fuel injectors, build some fuel rails, and bold a throttle body on the intake.

Might be able to use the intakes off a 911 on a t4 if you could build an adaptor to get rid of the angle from the intake ports, probably cheaper to start from scratch though.

http://forums.pelicanparts.com/showt...0&pagenumber=6

[Sandeep]

Great information.

I'm using dual CB 48mm TB's to go with my turbo system. I'll have to plumb the turbo and ducting before I buy the MS kit and hopefully I can build something to work with my 911 shroud.

Sandeep

[ace007]

I just received all the parts to build the megasquirt controller, simulator, viewer and the relay board for a 2270 turbo I’m building. So with in the next couple of weeks I’m hoping to get it put together. There are a couple other sites I frequent where this subject has come up quite often in the last month or so just do a search for megasquirt and have a look.

http://forums.pelicanparts.com/searc...by=&sortorder=


http://shoptalkforums.com/search.php?mode=results

there is also another site called www.dune-buggy.com with a few people that are running megasquirt one guy has built 3 so far 1 in a buggy 1 on a 350 chevy and the third is going on a tpi chevy motor. Also take a look here for info on plenum design and injector sizing.

http://www.dune-buggy.com/turbo/index.htm

[Shadowbug]

I've been planning in this direction for a while, I want to run a megasquirt injection system with a supercharger (from a toyota 4agze) on my type 4 powered beetle.

I just need to sell my carbs to buy the SC.

I like that you its already equipt to handle boost.

[jhelgesen]

Thanks for starting this thread, I finally got off my duff and ordered my parts to build the ecu.

[boygenius]

Originally Posted by Shadowbug

I just need to sell my carbs to buy the SC.

What type of carburetors.???

I need a set of dual carbs for my car.
Let me know.
Brendan....