915 flange, 944 cv...

[trevorbrady]

jeez... fine splines vs. coarse. I don't know... I seem to remember them being pretty coarse, like only 16 or 17 splines on the shaft.
I have a pic of the splines on my home computer somewhere, I'll post it up tomorrow, maybe you'll know by looking.

I measured up the flanges and the cvs this morning and found that the 944 CV has a pcd of 6x86mm and an outer diameter of 100mm. The flanges in the gearbox have a pcd of 6x94mm and an outer diameter of 110mm. However, only 4 of the holes are drilled through and tapped for the CV bolts.

does this shed any light??

Thanks for your help.

Trev