Tilton dual pedal assembly

[Sandeep]

Thought I would post an update on my progress so far.





After lots of different designs, this is what I came up with. It will fit perpendicular to the stock brake pedal (why mess with something that works) on the fuel tank side of the front bulkhead. I need to fab up the pivot for the balance bar and a 90 degree bellcrank to convert the brake pedal's movement to match the assembly. The whole deal will bolt on and then I have to run the brake lines.

I made the MC Box a little larger than the mc's because this will allow room for final adjustment to get the balance bar fitted.

I'm using Wilwood components ... 25.4mm mc (f) and 22.22mm mc (r) with balance bar and remote bias adjuster.

More details when I progress futher :righton:

Sandeep