Porsche Bolt Pattern in Stock Drums

[zen]

dave meant 5x130, not 4x130.

he hooked me up with a guy down in his area to press the studs into my CSPs back when i had them. good work and cheap. i think his name was Scott.

[NO_H2O]

Isaid the bug patern is 4x130 and the porsche patern is 5x130 so 1 hole from the bug patern wil be used and 4 new ones will be drilled.
Try Scott Perdue at 20th Century Tool (770) 474-4186 or (770) 474-2410.
If he is not real busy he can turn them quick. If he is backed up it might take a while. Tell him I sent you.

[OldeFahrt]

Sorry to dig one up so deep in the bone yard.

I've been searching for a pair of rear drums in the 5 x 130 bolt pattern. The closest I've found is CIP1 that has a drum with the Porsche pattern & a Chevy pattern in the same drum (yeah, the wheel has 10 stud holes). I'm pulling just over a g on the skid pad and I'm not going to consider re-drilled or multi-pattern drums. I'm not going to rear discs. If anyone has a lead, I'd appreciate the turn on.
Thanks

[02cab]

http://www.machine7.com/

copy and paste this number into the search section 440.320.60 they sell 5x1`30 drums also discs if anyones looking

hth :agree:

[wrenchnride247]

Jaytech forge, and So Cal imports sell blank drums, or can drill them for you.