Pics for Joe...

Rob · #1 October 4th 2004, 20:51

Crap again, now it went from my 'nice to have' to my 'must have' list

Since I am planning on using the same ducts for my radiator.......

BTW panel, thanks for the research

:agree:

Rob.

SilverBullet · #2 October 5th 2004, 12:12

Hi Joe, you've got mail!

Panelfantastic · #3 October 5th 2004, 13:38

Definately let Joe know if this stuff interests you!
Let him know how you intend to fit it so he can decide how to set these up for universal fit. If it can be "cross marketed" to several uses, we all win!

**Carbon Joe** · #4 October 9th 2004, 17:24

Panelfantastic,
I received the box yesterday and started working on the pattern. I can sense your frustration with all the different sized ducts. Thanks for sending them, when I a chance I'll start on the mold for the single duct first. I'll keep you posted on the progress of the mold and the final part.

Thanks

Panelfantastic · #5 October 9th 2004, 19:28

Joe,
The only thing I'm in a crunch for is the scoop for my dual NACA ducts (the piece I tried to make a mold for). As far as re-making the single and double NACA ducts in carbon, that could be a winter project. I'm good with the plastic ones for now...
I actually need two of those scoops I was trying to make, one for each side. The scoops are gonna be a perfect companion piece for the NACAs when you start making those in carbon, you might even consider making it together like in this pic...look at the "vortex air duct" about mid page...
http://www.gospitzer.com/prodline1.htm

Thanks a million!
Jeff

**Carbon Joe** · #6 October 14th 2004, 15:32

Jeff,
I've got the the first scoop done, I'll send you a e-mail with a few more pics so you can post it and I'll get a pair out to you this weekend.

Thanks,

Panelfantastic · #7 October 14th 2004, 20:18

Joe is the Carbon MAN!
Check these spy shots of one of my scoops fresh out of the oven! :bowdown:

This is going to be so kickass!!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)