|
|
|
|
#1
February 14th 2005, 17:48
|
||||
|
||||
On the tank you also see the tube for the right side. Also are the brackets for this tube ready to be welded on the cage and on the strutbraceplate. So that one will be in next week.
I hope you liked it!!!   Grt Wiebrand
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!! 
|
|
#2
February 14th 2005, 17:49
|
||||
|
||||
|
p.s. why can I NOT make longer post at one time!!!! This only causes spacetrubble.. but yeah....
 P.S. I hate TOOOOOOOO much tags/smiles in your post message...pffffff
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!!
|
|
#5
February 28th 2005, 18:57
|
||||
|
||||
|
SO BOYS AND GIRLS.
It's about time for another update. And I must say it's getting ready quite nice. At first we had made the tube on the right side that goes to the strutbrace http://www.keversite.nl/fotoalbum/fo...2005223535.jpg There must be made another 2 tubes for the strutbrace to the cage and then is the hole front side ready!! Here an totalpic till now.  A picie form about http://www.keversite.nl/fotoalbum/fo...2005223714.jpg For the tubes from the cage to the chassistunnel there is welded an bracket at the cage. Also the tubes are made on the right size and are welded off. And that gifs the next pic.  The totalpicture from the front http://www.keversite.nl/fotoalbum/fo...2005224025.jpg The totalpicture from the back  After that we made an tube on the right size for between the cage and the brackets on the rear wheelarces.  Detailpic of the welding... Looks damn nice if you ask me.. http://www.keversite.nl/fotoalbum/fo...2005224210.jpg
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!!
|
|
#6
February 28th 2005, 18:58
|
||||
|
||||
|
And also the next tube is made on the right size. The cost verry much time ; grinding, fitting, grinding, fitting, grinding, etc.. But after all it fits damn nice.
 Detail pic from above http://www.keversite.nl/fotoalbum/fo...2005224350.jpg Detailpic from under http://www.keversite.nl/fotoalbum/fo...2005224426.jpg But yeah if it goes on the leftside it also has to come on the rightside. http://www.keversite.nl/fotoalbum/fo...2005224459.jpg And also tonight I 've worked on the cage and 1 tube of the cross of the cage is also ready to be welded in. I hope you enjoyed it. Greetings Wiebrand
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!!
|
|
#7
March 2nd 2005, 16:22
|
||||
|
||||
|
So yesterdayevening I had some time, so I have worked on my cage.
The first piece of the cross in the cage is ready and is till thursday tacked in.  Under http://www.keversite.nl/fotoalbum/fo...2005211031.jpg Above http://www.keversite.nl/fotoalbum/fo...2005211057.jpg The other half of the cross is made almost on the right size. Here a little pre-look at it.  Greetings Wiebrand
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!!
|
|
#8
May 12th 2005, 16:51
|
||||
|
||||
|
So the cage weight about 68 a 70 kg thats heavy. BUT IT IS SO COOL. I am planning to build one out of aluminium.
__________________
90 in to te corner.
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
