Where I'm at so far...

[yetibone]

Originally Posted by volkdent

Looks awesome! Just tell me the struts bottom out before the front of the control arm does?

Jason

Well, the IIRC, the ball joints are 6.5" off the ground with 205/40-17 tires, so with the frame head on the ground, and the ball joints 6.5" off the ground, I have about 1/4" clearance between the control arm and it's channel within the framehead. The bump-stops make contactwell before that.

That's what the angle is for in those diagonal links I added to the control arm. Eliminates an acclusion problem.