|
|
|
|
#1
May 2nd 2005, 07:13
|
||||
|
||||
|
Sam,
I know this might not be the place to ask... but hey it keeps the thread alive  What type of EBERSPACHER have you got fitted ? I've just bought a B3L although the bloke I bought it from explained how to wire it, he wasn't exactly the brainiest bloke around. I really don't want to wire it all up and something go 'pop' Cheers Rob By the way the Bug is going to be one cool beast 
__________________
Rob. 
|
|
#2
May 2nd 2005, 11:49
|
||||
|
||||
|
The eberspacher is long gone. I bought a second car for myself and hence the bug now only gets used in nice weather, so no need for a heater.
As for a wiring diagram, google is your friend... took me 10 seconds to find this: http://www.conservatory.com/vw/manuals_nyx/EberBN4.html Not exactly what you are after, but fairly close... If I remember right Just Kampers also had wirind diagrams (may be wrong on that) ---------------------------- No pictures just yet, but over the Bank holiday weekend I have fabricated and welded in the seat bracket/reinforcement bars which tie the heater channel and center tunnel together, and also provide the mounting points for the seats subframe It also doubles up as a secure hiding place for the amps.Pictures later Cheers, Sam C
__________________
1973 1303 (super beetle) in Jaguar British racing green, Raby 2270, B spec gearbox, Lots of carbon fibre, Wolfrace Octane Black 17x7.5, Goodyear Eagle F1's, Kerscher suspension front and rear, kamei airdam in carbon, corbeau seats, momo millunium steering wheel. CDT eurosport 6.5 front speakers, IDMAX 12D2 sub, rockford old school amps.
|
|
#3
May 2nd 2005, 14:03
|
||||
|
||||
|
I did a search and found that but it's not the same as the newer models
 Cheers anyway, keep us posted with the Bug.
__________________
Rob.
|
|
#4
May 3rd 2005, 16:10
|
||||
|
||||
|
For those who know quality kit:
IDMAX 12 D4  Big magnet, very sensitive... Doesnt take much power to make this very loud...  Old School Rockford Fosgate POWER 500 a2... Cant remember exact specs from the sheet but its something like 2x650watts RMS. For the sub.  Here you can see the seat mounting rails I welded in over the weekend.. These tie the heater channel and center tunnel together, and are also seam welded to the floor.. Seat mounting bolts go through the floor, through the box section and into the subframe bits.  Thats the Rockford Fosgate Punch 250, for the front speakers (which I havent purchased yet, still auditioning speakers). Phoenix gold bass cube will go on the same mounting board, hidden under the seats. Cant get the stereo out without removing the seats... Should hinder any would be theives. Cya, Sam C
__________________
1973 1303 (super beetle) in Jaguar British racing green, Raby 2270, B spec gearbox, Lots of carbon fibre, Wolfrace Octane Black 17x7.5, Goodyear Eagle F1's, Kerscher suspension front and rear, kamei airdam in carbon, corbeau seats, momo millunium steering wheel. CDT eurosport 6.5 front speakers, IDMAX 12D2 sub, rockford old school amps. Last edited by samcat; May 3rd 2005 at 16:16.
|
|
#6
May 9th 2005, 18:06
|
||||
|
||||
|
Ok, amp board for the passenger side is nearly done, just thinking about where that relay should go, as I am not happy with its current location.
 Few last bits for wiring are on the way. And the driver side amp board is done:  Once the seats are in there is no chance of taking these out without removing the seats... And it will be hard to get to them to do wiring.. Hence why I am doing it all now. I also did another round of filling/sanding this weekend... The bodywork is starting to feel flat enough for me to start using the medium (400) and fine (800) paper to get the surface ready for the paint... Also did a shedload more wiring on the drivers door, but I need to get some more heatshrink as I ran out!! 15 wires run into the drivers door alone! Cya, Sam C
__________________
1973 1303 (super beetle) in Jaguar British racing green, Raby 2270, B spec gearbox, Lots of carbon fibre, Wolfrace Octane Black 17x7.5, Goodyear Eagle F1's, Kerscher suspension front and rear, kamei airdam in carbon, corbeau seats, momo millunium steering wheel. CDT eurosport 6.5 front speakers, IDMAX 12D2 sub, rockford old school amps.
|
|
#7
May 9th 2005, 19:05
|
||||
|
||||
|
On the trail of a set of CDT 6.5" Eurosport Components for the front stage
 GOOD speakers! Those who know car audio will KNOW what these are like!Cya, SaM C
__________________
1973 1303 (super beetle) in Jaguar British racing green, Raby 2270, B spec gearbox, Lots of carbon fibre, Wolfrace Octane Black 17x7.5, Goodyear Eagle F1's, Kerscher suspension front and rear, kamei airdam in carbon, corbeau seats, momo millunium steering wheel. CDT eurosport 6.5 front speakers, IDMAX 12D2 sub, rockford old school amps.
|
|
#8
May 15th 2005, 12:14
|
||||
|
||||
|
DAMN I had a IDMAX12D2V2 in my 65
with 400w from a ARC Audio CXL2100 It was loud But my A-1 Header was Louder.. This Should Sound Great.. Keep the pix comming.. Peace Troy
__________________
SOLD!! 65 Bug 1835cc,Duel Dell 34's,BMD Serp Belt, A1 Perf. Sidewinder,CompeUfire Pointless Ign 95A Alt,CSP Valve Covers,Randar Diego 16's Soon [URL=http://www.cardomain.com/id/troy_audio]
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
