|
|
|
|
#1
July 24th 2005, 13:58
|
||||
|
||||
|
So here some updates where I didn't had time for in the last week
On sunday one week ago, I resumed making my own mid mount. I almost spent an half day at it, but hell yeah it saves some (hard needed) money. But everything looks damn sexy!! B-Tuning Productions all the way :wink:  Detailpic http://www.keversite.nl/fotoalbum/fo...2005000724.jpg Picture of the mid mount  I also welded the front brackets off, so everything is verry studdy. On the monday I most of the time drived around to get stuff. I also welded some pieces of my handbrake-bracket. Welded some nuts in the chassistunnel so I can bolt the handbrakebracket on my tunnel. On Wednesday i work hole the day on my car. I also today got my front trailingsarm back were the bushings were pushed out. http://www.keversite.nl/fotoalbum/fo...2005000843.jpg
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!! 
|
|
#2
July 24th 2005, 13:59
|
||||
|
||||
|
Wednesday one week ago i welded several unused holes close in the chassistunnel, so it stays one clean thing. Also is the hole for the original handbrakecables enlarged so I still can use them on my hydraulic handbrake.
An little bit unclear picture, maja  Handbrake-bracket is on.  Two holes in the bracket so the handbrake-cables still can be used. http://www.keversite.nl/fotoalbum/fo...2005001202.jpg Last one  I also maked an big "cage" so could sandbalst my car one day later (thursday). Grt Wiebrand
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!!
|
|
#3
July 24th 2005, 14:00
|
||||
|
||||
|
On thursday one week ago (I know I'm verry bussy with my car so I couldn't update earlier ( my car is going to an show this saturday 23 of July, thats why).
Sandblasting works SUPER!!.. one side of my chassis tooked me 45 minutes. You cant keep that up with your grinder. I used an 10m3/min aircompressor, Man that thing blows some air out. On that day the hole chassis was blasted and several pieces of the body we blasted.
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!!
|
|
#4
July 24th 2005, 14:02
|
||||
|
||||
|
On last friday I also have blasted some pieces of the body. ANd looked everything over if I had done every piece as good as it could. Worked till half past eleven that evening.
This are some pictures of thursday (one week ago) Af first our self maded blasting"cage".  http://www.keversite.nl/fotoalbum/fo...2005004759.jpg Chassis and body stands in the blastingcage 
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!!
|
|
#5
July 24th 2005, 14:03
|
||||
|
||||
|
On this picture the sandblaster, airfilter for the helme, the helmet and gloves good to see. We hired this one, it was an brand new one (lucky 8) )
 This is how it looks after +/- 15 min of blasting, you can't keep it up with your grinder. 
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!!
|
|
#6
July 24th 2005, 14:05
|
||||
|
||||
|
.... NAKED TO THE BARE METAL... Just what I love
  The "small" compressor we use (almost as wide and high as our bus) is an 10m3/min compressor.  Chassis is blasted on the backside the front is half way. The weelarches are also blasted as test. 
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!!
|
|
#7
July 24th 2005, 14:05
|
||||
|
||||
|
Enginecompartment is blasted. The rust that you can see is after this pic also blasted away.
 Wielarches, enginecompartment, raingutter, windowgutters and "kokerbalken" were blasted  Chassis in the epoxy primer  http://www.keversite.nl/fotoalbum/fo...2005002401.jpg p.s. the underside was then not yet painted Grt Wiebrand
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!!
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
